[Equest-users] (no subject)

[Reilman, Andrew]

You can fake a donut zone though.  The vertices just need to be "close".  The picture I attached shows this a little exaggerated.

[cid:image003.jpg at 01CB6F69.C11BB9A0]

Regards,
Andrew Reilman, P.E.
Associate
Senior Engineer, LEED(r) AP BD+C
Syska Hennessy Group, Inc.
A member company of SH Group, Inc.
[cid:image001.gif at 01CB6F68.3539BF50]

11500 W. Olympic Blvd.,
Suite 680
Los Angeles, CA 90064
Tel: 310.254.3894
Cell: 510-710-4817
Fax: 310.473.7468
Email: areilman at syska.com<mailto:areilman at syska.com>
http://www.syska.com<http://www.syska.com/>

[cid:image002.gif at 01CB6F68.3539BF50]Please consider the environment before printing this e-mail
________________________________
This email and any files transmitted with it are the property of SH Group, Inc. and are intended solely for the use of the individual or entity to which they are addressed. The information contained herein may include trade secrets or privileged or otherwise confidential information and unauthorized review, forwarding, printing, distributing, or using such information is strictly prohibited and may be unlawful. If you received this message in error, or have reason to believe you are not authorized to receive it, please promptly delete this message and notify the sender by e-mail.
________________________________

From: equest-users-bounces at lists.onebuilding.org [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Eddie Corwin
Sent: Tuesday, October 19, 2010 8:28 AM
To: equest-users at lists.onebuilding.org
Subject: Re: [Equest-users] (no subject)

You can not make a "Doughnut" zone.  you will need to separate the perimeter zone into two or more zones.  Using the "Core/Shell Zoning pattern that is available in the wizard works well.


________________________________
From: Erik Weiss <ew0187 at gmail.com>
To: equest-users at lists.onebuilding.org
Sent: Tue, October 19, 2010 11:22:08 AM
Subject: [Equest-users] (no subject)

I am creating a 20 floor building and the core is defined. i am trying to create the zones within the core and the large single zone surrounding the core. I am unable to create 1 single zone surrounding the core because the wizard does not allow you to select the same vertex twice in a single zone. Is there anyway around this
_______________________________________________
Equest-users mailing list
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send  a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG<mailto:EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20101019/4bb20db5/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.gif
Type: image/gif
Size: 2443 bytes
Desc: image001.gif
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20101019/4bb20db5/attachment.gif>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image002.gif
Type: image/gif
Size: 91 bytes
Desc: image002.gif
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20101019/4bb20db5/attachment-0001.gif>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image003.jpg
Type: image/jpeg
Size: 19198 bytes
Desc: image003.jpg
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20101019/4bb20db5/attachment.jpg>