[Equest-users] Heated Plenum

[Jeremy McClanathan]

I forgot to mention that you need to be in the detailed edit mode to do this.  In the wizard, set the flr-flr height 4' higher than the flr-clg height and it will automatically create your plenum for you.  Once you are finished in the wizard, move to the detailed edit mode.  Then, set the zone type to conditioned and apply a heating schedule.

Also, in the wizard, if you set the HVAC system to "one per floor", then the wizard will create only one plenum for each floor.

Jeremy

From: Jeremy McClanathan
Sent: Sunday, October 17, 2010 9:06 AM
To: 'Attiq Rahman'; 'equest-users at lists.onebuilding.org'
Subject: RE: [Equest-users] Heated Plenum

You can set the zone type to conditioned and apply a heating schedule.

Jeremy

From: Attiq Rahman [mailto:attiqurrahman at hotmail.com]
Sent: Sunday, October 17, 2010 6:27 AM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] Heated Plenum


Hi there,










I am modeling a building in eQUEST. This building has a garage on the ground floor and the





ceiling above is concrete, there is a(4' high)plenum below this concrete ceiling. This plenum is heated (with condensing furnaces)in





order to heat/temper the concrete ceiling which is the floor for the residents on the 2nd floor. (I know hydronic heating could be used)





Any ideas how this can be modeled in eQUEST.










Thanks.










Attiq

This email message, including any attachments, is for the sole use of the intended recipient and may contain confidential, proprietary, and/or privileged information, as well as content subject to copyright and other intellectual laws.  If you are not the intended recipient, you may not disclose, use, copy, or distribute the email message or its attachments.  If you believe you have received this email message in error, please contact the sender by reply email, immediately delete this email and destroy copies.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20101017/90060edd/attachment.htm>