[Equest-users] Space Polygons and Floor Polygons in Detail Edit Mode

[Carol Gardner]

Kelsey,

You don't need to change the floor polygon unless your floor shape changes.
You have done it correctly.

Carol

On Wed, Oct 13, 2010 at 12:06 PM, Kelsey VanTassel <
KVanTassel at sustaineng.com> wrote:

>  Hello eQUEST users,
>
>
>
> I need to modify the geometry of my perimeter spaces in detailed edit mode
> (see attached PDF illustration). Is it all right to modify only the space
> polygons and not the floor polygon? Even if now some of the vertices of the
> space polygons lie outside the floor polygon? Does eQUEST use the area of
> the floor polygon for anything? Or is it ok as long as the sum of all the
> space areas is correct? All of the space polygons reference vertices on the
> floor polygon so if I go changing the floor polygon it messes everything up.
> Plus, I would need to delete vertices on the floor polygon in order to avoid
> overlapping vertices, but I can’t since the space polygons reference some of
> those would-be deleted vertices. The model runs fine with the modified space
> polygons.
>
>
>
> Thanks!
>
>
>
> *Kelsey Van Tassel***
>
> Mechanical Engineer | kvantassel at sustaineng.com
>
> 608.836.4488 ext. 20 | Fax: 608.836.4477
>
>
>
> Sustainable Engineering Group
>
> 901 Deming Way, Suite 201
>
> Madison, WI 53717
>
> www.sustaineng.com
>
>
>
>
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>


-- 
Carol Gardner PE
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20101014/96cd2851/attachment.htm>