[Equest-users] Title 24 Compliance

[Erik Kolderup]

Try entering heating capacities as negative numbers. I don't know if that's
an issue in the latest eQUEST, but I encountered that issue running T24
compliance in the past.

 

-Erik

 

Erik Kolderup, PE, LEED AP

Kolderup Consulting | 415.531.5198 | erik at kolderupconsulting.com

 

 

From: Greg Collins [mailto:GCollins at glumac.com] 
Sent: Wednesday, October 13, 2010 1:12 PM
To: John Keller; equest-users at lists.onebuilding.org
Subject: Re: [Equest-users] Title 24 Compliance

 

I'm not sure why you get that error, but I have also gotten it a couple
times.  It seems that the compliance engine doesn't feel like autosizing
this particular capacity value.  I do know exactly how to fix it..  Can you
guess?  

 

Input a capacity.

 

Greg Collins
GLUMAC | (949) 833-8190

 

From: John Keller [mailto:john at wehage.org] 
Sent: Wednesday, October 13, 2010 11:38 AM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] Title 24 Compliance

 

I'm trying to run "Compliance Analysis" and I get the following error: 

 

"Set system heating capacity: CRule::Eval() error posting numeric result
(-1.82731e+008) to BDL"

 

I can run a normal simulation and I don't get any errors.  Any ideas on what
this means and how I might fix it?  

 

Thanks,

 

John M. Keller, P.E.

 

Wehage Engineering, Inc.

1236 Disk Drive, Suite I 

Medford, OR 97501

p: 541-842-4188 x103  f: 541-842-4189

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20101013/0a91ac09/attachment.htm>