[Equest-users] unconditioned spaces

[deepika khowal]

How do you get hourly temperatures inside the room?
If I run simulation, I can get results for hourly and monthly radiation, but
there is no output showing the temperature inside due to all glass sunroom.
Regarding controls, I want to use incident radiation and temperature as the
control.
I am modelling switchable glazing, so want to analyse the energy savings by
using switchable glazing in an unconditioned room.
Thanks
Deepika

On Wed, Oct 13, 2010 at 5:38 AM, R B <slv3sat at gmail.com> wrote:

> You can get the monthly temperature by first outputting the hourly
> temperature and using excel to do the averages.
> What controls are you thinking of? You could do daylight control based on
> illuminance and solar control based on glare.
> - Rohini
>
>
> -------------------------------------------------------------------------------
> Rohini Brahme, Ph.D., LEED AP
> Building energy analysis, tool development and training
> Dallas/Fort Worth, TX
>
>   On Wed, Oct 13, 2010 at 12:23 AM, deepika khowal <
> deepika.khowal at gmail.com> wrote:
>
>>  hi
>> can anyone tell me how to find the monthly indoor temperature of an
>> unconditioned space in equest?
>> I am finding out the difference in thermal comfort with respect to
>> temperature by changing the glazing specifications.
>> is there any control which can be activated.
>> Right now I dont have any HVAC for heating and cooling.
>> Thanks
>> Regards
>> Deepika
>>
>> _______________________________________________
>> Equest-users mailing list
>> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
>> To unsubscribe from this mailing list send  a blank message to
>> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20101013/6ef1fdf0/attachment.htm>