[Equest-users] sloped roof in equest

Carol Gardner cmg750 at gmail.com
Wed Oct 13 00:23:09 PDT 2010


Deepika,

One of the common mistakes I make when I create a roof in DD edit is
forgetting to locate it at the right height. Make sure your z=building
height or wall height, whichever is appropriate. It's not too hard to do
this in DD edit as long as you keep track of the x, y, z, tilt and azimuth.
Kudos for you for tackling it!

Carol

On Tue, Oct 12, 2010 at 5:08 PM, John Aulbach <jra_sac at yahoo.com> wrote:

> Which is why you keep a Wizard copy of your file. When I convert to the
> Detailed Edit mode, I *save as* FILENAME-DETAIL. Then if I need to go
> back, I have my original Wizard file.
>
>
> John R. Aulbach, PE, CEM
>
> Senior Energy Engineer
>  ------------------------------
>
> *Partner** **Energy*
>
> 1990 E. Grand Avenue, El Segundo, CA 90245
> W: 888-826-1216, X254| D: 310-765-7295 | F: 310-817-2745
>
> www.ptrenergy.com | jaulbach at ptrenergy.com <%7C%20jaulbach at ptrenergy.com>
>
>  ------------------------------
> *From:* "Wolfe, Brian" <bwolfe at hksinc.com>
> *To:* deepika khowal <deepika.khowal at gmail.com>; "
> equest-users at lists.onebuilding.org" <equest-users at lists.onebuilding.org>
> *Sent:* Tue, October 12, 2010 1:37:35 PM
> *Subject:* Re: [Equest-users] sloped roof in equest
>
>  Equest won’t allow you to create in the wizard then, switch out of the
> wizard to make changes then, back again with the changes made.  Once you
> switch out of the wizard, you stuck.
>
>
>
> BRIAN J. WOLFE, CDT, LEED AP BD+ C
>
> SUSTAINABLE DESIGN COORDINATOR
>
> HKS, INC.
>
> 1919 McKINNEY AVENUE
>
> DALLAS, TX 75201
>
> 214.969.5599 ext.3669
>
> bwolfe at hksinc.com
>
> www.hksinc.com
>
> If you are sending file(s) always use my *Thru DROPBOX*<https://hks.thruinc.net/drop_box.asp?toemail=bwolfe@hksinc.com>
>
>
>
> *From:* equest-users-bounces at lists.onebuilding.org [mailto:
> equest-users-bounces at lists.onebuilding.org] *On Behalf Of *deepika khowal
> *Sent:* Tuesday, October 12, 2010 3:16 PM
> *To:* equest-users at lists.onebuilding.org
> *Subject:* [Equest-users] sloped roof in equest
>
>
>
> Hi All
>
>
>
> I am trying to model a sunroom which has sloped roof.
>
> I made the model in SD wizard but when am changing the vertices in the
> design data model mode to change the roof to sloped,  am not able to save
> the changes if I open the wizard again.
>
> Also if I create a new polygon (triangle shaped to complete the sloped
> roof), am not able to see that in my model.
>
> if anyone have any inputs, it will be highly appreciated.
>
>
>
> Thanks
>
> Regards
>
> Deepika
>
>
>
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>


-- 
Carol Gardner PE
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20101013/5e0fac0a/attachment.htm>


More information about the Equest-users mailing list