[Equest-users] PS-C report pump curve question

[King-Scott, Celia]

Hi all, 
 
I am currently looking at the savings between a two-speed and VSD CHW
and CW pumps. 
I see that PS-C Equipment Loads and Energy Use and PV-A Plant Design
Parameters are the best reports for this analysis. 
When i look at the pump curves, though there is a third line reported
which has the heading 'ELEC'. 
 
What exactly does this refer to? 
Is it the ELEC load of the pump?....I am not familiar with this curve
and if anyone could provide more light on this it would be greatly
appreciated. 
 
Thank you. 

Best Regards,

Celia King-Scott
LEED(r) AP BD+C
Sustainable Design Consultant

KEMA Services Inc.
3605 5th Avenue, Suite A
San Diego, CA 92103

Direct +1 619 688 0960 x 75120
Mobile +1 619 309 7441

celia.king-scott at kema.com <mailto:celia.king-scott at kema.com> 
www.kema.com/sustainable-buildings
<http://www.kema.com/sustainable-buildings>  
This message may contain confidential or privileged information. If you
are not the addressee, please return the message to its sender and
delete it from your files.
Please consider the environment before printing this e-mail.




 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20101012/b9a324f2/attachment.htm>