[Equest-users] HOw can equet get the indoor air temp and the internal surface temp of roof or exterior wall that the model is without HVAC system

[R B]

Yes, equest should be able to do it. You can get the hourly internal surf
temp and indoor temp using the hourly report and set the thermostat
setpoints to very large (cooling) and small numbers (heating) so that the
HVAC does not come on.
Let me know if this works.
-Rohini

--------------------------------------------------------------------------------
Rohini Brahme, Ph.D. LEED AP
Building energy analysis, tool development, and training
Dallas/Fort Worth, TX


2010/10/12 tsea2005 <tsea2005 at 163.com>

>
> HI:
> HOw can equet get the indoor air temp and the internal surface temp of roof or exterior wall  that the model is without HVAC system
> ?Can equest make it?
> Thanks!
> 2010-10-13
> ------------------------------
> tsea2005
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20101012/1998339e/attachment.htm>