[Equest-users] LEED Compliance Error

[Pasha Korber-Gonzalez]

Hi Anthony,

attach your .pd2 & .inp file to an email and some of us can look at it and
see if we have any ideas...

Pasha

On Fri, Oct 8, 2010 at 12:22 PM, Anthony Hardman
<Anthony at greenengineer.com>wrote:

>  Bldg Sim’s,
>
>
>
> Any more troubleshooting tips with regards to the following LEED Compliance
> error, “assign zone to baseline floor system.”  I still can’t get the
> compliance tool to generate a baseline for me.
>
>
>
> I don’t have any plenums, I started this model in v3.64 and I’ve exceeded
> my time and patience for this project at the moment.
>
>
>
> Is there an error code manual (not the tutorial) that states what these
> cryptic messages are actually referring to?  I missed that memo…
>
>
>
> *Anthony Hardman, PE*
>
> *LEED AP BD&C***
>
> Building Performance Analyst
>
> *The Green Engineer, LLP*
>
> Sustainable Design Consulting
>
> 50 Beharrell St
>
> Concord, MA 01742
>
> O: 978/610-2801
>
> C: 720/840-7862
>
>
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20101008/1092542e/attachment.htm>