[Equest-users] design flow input vs. SV-A supply flow reporting

[Christian Stalberg]

They say no question is a stupid question.
 
Why is my zone level supply flow cfm reported value in the SV-A report 
higher than my overall design flow (ASSIGNED-FLOW) value? The 
system sizing ratio is set at 1.00 (default).
 
Thanks in advance.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20101008/75896a01/attachment.htm>