[Equest-users] Classroom Unit Ventilator

[Carol Gardner]

Hi Dan,

You can't do much of anything related to HVAC systems in the SD wizard. Try
the DD wizard, or better yet, the Detailed Data edit mode.

Carol

On Tue, Nov 23, 2010 at 6:00 AM, Raphael, Dan <draphael at ids-troy.com> wrote:

> Hello All,
>
>
>
> I am modeling a classroom with a unit ventilator.  The heating source is to
> be hot water coils and the cooling source is DX coils.  However, in the
> schematic design wizard, it appears that the only way to get a unit
> ventilator is to use no heating and no cooling.  How can I use a unit
> ventilator with DX and hot water coils in eQuest?  Any help would be
> appreciated.
>
>
>
> Thanks in advance.
>
>
>
> *Dan Raphael*
>
> Building Performance Analyst
>
> *Integrated Design Solutions*
>
> Architecture, Engineering, Interiors & Technology**
>
> 1441 W. Long Lake, Suite 200
>
> Troy, Michigan 48098
>
> tel:   248.823.2171
>
> fax: 248.823.2200
>
> www.ids-troy.com
>
>
>
> <http://www.energystar.gov/>
>
>
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>


-- 
Carol Gardner PE
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20101123/6f722c3d/attachment.htm>