[Equest-users] pnuematic -> DDC controls

Priolo, Vincent Vincent.Priolo at trane.com
Mon Nov 22 10:03:53 PST 2010


Dear all,
New user here working on modeling VAV pneumatic to DDC conversion for energy savings.  Looking to model chilled water reset, hot water reset, pressure reset, increased VAV response, and energy savings from compressor.  Looks like model must be done in Design Development Wizard.

Any advice?


Vince Priolo

Energy Solutions Engineer

Southern California Trane

Cell - 805-550-4298

Direct - 626-435-1187

vincent.priolo at trane.com

________________________________
From: equest-users-bounces at lists.onebuilding.org [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Praveen Jain
Sent: Sunday, November 21, 2010 11:35 PM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] Relative Humidity in Unco


Dear All

Is it possible to know Relative Humidity in unconditioned zone of  eQUEST ?

--
With Thanks and Regards,
Praveen K. Jain
Roorkee

________________________________
The information contained in this message is privileged and intended only for the recipients named. If the reader is not a representative of the intended recipient, any review, dissemination or copying of this message or the information it contains is prohibited. If you have received this message in error, please immediately notify the sender, and delete the original message and attachments.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20101122/fad46b18/attachment.htm>


More information about the Equest-users mailing list