[Equest-users] (no subject)

[Jamil .]

One more question regarding the rates, when I enter 2 different blocks 
like when the consumption is less than 2000 Kwh, the rate is x and when 
it exceeds 2000 Kwh the rate becomes y, where can i make sure that this 
is on monthly basis and that during simulation, the program will start 
counting from 0 Kwh once a new month starts?

Thank you 

Jamil
M. Eng. LEED AP
 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20101117/5d3277e4/attachment.htm>