[Equest-users] about algorithm and numerical models of E-Quest

[Pasha Korber-Gonzalez]

Yes, eQuest used DOE2 (version 2.2) as the simulation engine.  eQuest is
simply the user interface to make using DOE2 simulation engine more
pleasant.  eQuest uses the most up to date and advanced version of DOE2.

pkg.

On Thu, Nov 4, 2010 at 12:04 AM, Nguyen Hoang Tuan
<nguyenhgtuan at yahoo.com>wrote:

>   Hi !
> Could You please help me about the algorithm of E-Quest ? Does it use the
> same algorithm and numerical models as DOE-2 ?
> And, Dose it have any improvement compare with DOE-2 ?
>
>
>  ------------------------------
> *From:* "equest-users-request at lists.onebuilding.org" <
> equest-users-request at lists.onebuilding.org>
> *To:* equest-users at lists.onebuilding.org
> *Sent:* Thu, November 4, 2010 4:02:34 AM
> *Subject:* Equest-users Digest, Vol 32, Issue 5
>
> Note: Forwarded message is attached.
>
> Send Equest-users mailing list submissions to
>     equest-users at lists.onebuilding.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
>     http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
>
> or, via email, send a message with subject or body 'help' to
>     equest-users-request at lists.onebuilding.org
>
> You can reach the person managing the list at
>     equest-users-owner at lists.onebuilding.org
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Equest-users digest..."
> Today's Topics:
>
>   1. Re: Chiller Curves (oh boy!) (Michael.Hupel at jci.com)
>   2. Re: Chiller Curves (oh boy!) (Paul Diglio)
>   3. Water-Cooled Condenser Loop -no attached primary    cooling
>       equipment (Elliott Knotts)
>   4. Re: Chiller Curves (oh boy!) (Michael.Hupel at jci.com)
> _______________________________________________
> Equest-users mailing list
> Equest-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
>
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20101104/3b18aeb0/attachment.htm>