[Equest-users] Water-Cooled Condenser Loop -no attached primary cooling equipment

[Elliott Knotts]

I have a building designed in eQUEST 3-64 with a Water-Source HP System, when I run the Compliance Analysis, the system generates a LEEDS-based Bldg but also generates a "CW-LOOP = *UNDEFINED*" error for each of the four systems. After defining the Condenser Water Loop from the library as "DEFAULT_CW" for each system, I get the following error: 
***ERROR***********************************************************************

Loop: DEFAULT-CW has no attached primary cooling equipment.

I have tried creating a Circulation Loop with a Pump, but I still get the no attached cooling equipment error. What am I doing wrong or How do I attach cooling equipment. I am about to go bald pulling my hair out.

I have attached the *.inp and *.pd2 files: 

Any and all advice will be appreciated.

Elliott
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20101103/050c57bf/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Sagemont Community Center Project9-29 - LEED_Base_Bldg.pd2
Type: application/octet-stream
Size: 8413 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20101103/050c57bf/attachment.obj>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Sagemont Community Center Project9-29 - LEED_Base_Bldg.inp
Type: application/octet-stream
Size: 84645 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20101103/050c57bf/attachment-0001.obj>