[Equest-users] Exterior usage by default

Bishop, Bill wbishop at pathfinder-ea.com
Tue Nov 2 12:56:23 PDT 2010


Ana,
 
If you select Exterior Lighting and assign an Exterior Lighting Load in
the Wizard, the energy use will show up as Exterior Usage in the
reports. There may be other components but that's all I'm aware of.
 
Regards,
Bill
 
William Bishop, PE, BEMP, LEED(r) AP | Pathfinder Engineers & Architects
LLP
Mechanical Engineer
 
134 South Fitzhugh Street
Rochester, NY 14608
T: (585) 325-6004 Ext. 114
F: (585) 325-6005
wbishop at pathfinder-ea.com
www.pathfinder-ea.com
P   Sustainability - the forest AND the trees. P
 
________________________________

From: equest-users-bounces at lists.onebuilding.org
[mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Ana N.
Sent: Tuesday, November 02, 2010 2:55 PM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] Exterior usage by default
 
Dear e-quest users,
 
 
What are the other components that e-quest by default assigns to
Exterior Usage Enduse in addition to Exterior Direct Load specified in
Electric Meter Properties?
 
Thank you
 
Ana
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20101102/784dcb57/attachment.htm>


More information about the Equest-users mailing list