[Equest-users] Error Message

[Lauren Rosenthal]

Hello all,

 

I've received this error message several times and can't figure out
which input needs to be revised - any help would be great.

 

**WARNING***************************************************************
*******

             In AHU-0-27_ConsSprayRmMUA (MASTER), the return humidity
for a coil exit T of  47.4 is 0.0065

             Your setpoint is 0.0005, which may not be held.

 

 
***ERROR****************************************************************
*******

             In AHU-0-27_ConsSprayRmMUA (MASTER), cooling coil leaving
temperature must

             be at least 6F higher than entering water temp.

 

 

____________________________________

Lauren Rosenthal

Mechanical Engineer

 

Los Angeles CA

 

____________________________________________________________
Electronic mail messages entering and leaving Arup  business
systems are scanned for acceptability of content and viruses
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100510/1e78aade/attachment.htm>