[Equest-users] modeling a pre-cooilng coil

[Lauren Rosenthal]

Whoever could lend me some help, I will direct you to a link to view the
file. Please let me know if you could be of any assistance!

 

____________________________________

Lauren Rosenthal

Mechanical Engineer

 

Los Angeles CA

 

From: Lauren Rosenthal 
Sent: Monday, May 03, 2010 6:04 PM
To: 'equest-users at lists.onebuilding.org'
Subject: modeling a pre-cooilng coil

 

I tried to model a pre-cooling coil (for the OA stream) by creating an
additional system that has 0 kW/cfm fan power and by assigning the main
system's OA to come from this OA system. However, in the simulation
results, the OA system had 0 MBTU for cooling/heating. In the OA system
I put a dummy zone on the system with no load in the hopes that the load
would be controlled by the OA demand from the zones in the main system.
What am I doing wrong?

 

Thanks for any help in advance,

 

____________________________________

Lauren Rosenthal

Mechanical Engineer

 

Los Angeles, CA 

 

____________________________________________________________
Electronic mail messages entering and leaving Arup  business
systems are scanned for acceptability of content and viruses
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100504/1fcbd597/attachment.htm>