[Equest-users] Heat Pump Efficiencies

Bishop, Bill wbishop at pathfinder-ea.com
Wed Mar 24 11:39:26 PDT 2010


Carol,
 
I got the attachment from an eQUEST training CD. Marlin Addison is
listed as the author.
 
Regards,
Bill
 
William Bishop, EIT, BEMP, LEED(r) AP | Pathfinder Engineers &
Architects LLP
Mechanical Engineer
 
134 South Fitzhugh Street
Rochester, NY 14608
T: (585) 325-6004 Ext. 114
F: (585) 325-6005
wbishop at pathfinder-ea.com
www.pathfinder-ea.com
P Please strive to live sustainably.
________________________________

From: equest-users-bounces at lists.onebuilding.org
[mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Carol
Gardner
Sent: Wednesday, March 24, 2010 12:12 PM
To: Bassam Yammine
Cc: equest-users at lists.onebuilding.org
Subject: Re: [Equest-users] Heat Pump Efficiencies
 
I also found some formulas when tooling around in the archives the other
day and could love to get comments, if any about their utlity:

EIR=(1/EER-0.012167)/((1/3.413)+0.012167)
and
EIR=((1/SEER*0.778+1.4)-0.012167)/((1/3.413)+0.012167)

Anyone remember these that knows the source and utility? Is there one
for HSPF?

Carol
On Wed, Mar 24, 2010 at 7:50 AM, Bassam Yammine <byammine at flowgroup.ca>
wrote:
Hi Michael, to modify the EIR (which is in Btu/Btu) in the detailed
mode, click on the Air-Side HVAC icon at the top of your screen, then
double click on the heat pump. Under the cooling and heating tabs you
will find a Unitary Power tab where you can change your EIR.
 
Regards,
Bassam
 
From: equest-users-bounces at lists.onebuilding.org [mailto:
equest-users-bounces at lists.onebuilding.org] On Behalf Of M. Shields
Sent: Wednesday, March 24, 2010 6:59 AM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] Heat Pump Efficiencies
 
Hi All,
 
I am still fairly new to equest and I am having a bit of trouble with
setting up my HVAC.  I created a building model using the equest wizard
and now I have made a number of changes within the detailed DOE2
interface.  The building uses air source heat pumps for the HVAC and I
would like to change the EER/COP values without going back to the
wizard, but I cannot figure where these values are stored.  Is there an
easy way to make changes like that within DOE2?
 
Thanks,
Michael Shields
 
____________________________
Michael Shields
Facility Strategies Group
2222 Gold Hill Road, Suite 5
Fort Mill, SC 29708
Phone: 803-493-4507
Fax: 803-548-2511
Email: mshields at fstrategies.com
 

_______________________________________________
Equest-users mailing list
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send  a blank message to 
EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100324/ed669f9c/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Converting EER and SEER to Cooing EIR.pdf
Type: application/octet-stream
Size: 92554 bytes
Desc: Converting EER and SEER to Cooing EIR.pdf
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100324/ed669f9c/attachment.obj>


More information about the Equest-users mailing list