[Equest-users] Data Entry - How much time is typically involved?

John Aulbach jra_sac at yahoo.com
Mon Mar 22 14:52:29 PDT 2010


Jeff:

It depends on:

a) How much accurate input data you need and 
b) What the level of modelling is

A good modeller (such may be found in these here parts on BLDG-SIM) might do it in 2 - 3 days, depending on if bill matching is required.



John R. Aulbach, PE, CEM
Senior Energy Engineer

________________________________

PartnerEnergy
1990 E. Grand Avenue, El Segundo, CA 90245
W: 888-826-1216, X254| D: 310-765-7295 | F: 310-817-2745
www.ptrenergy.com| jaulbach at ptrenergy.com



________________________________
From: Jeffrey Byrne <jbyrne at practicalenergy.net>
To: equest-users at lists.onebuilding.org
Sent: Mon, March 22, 2010 1:11:17 PM
Subject: [Equest-users] Data Entry - How much time is typically involved?


We are just beginning the use of equest and I was trying to get an idea of the typical time it should take to create a model on an existing building.
The intended result is to have a model in place where scenarios can be run to help determine what future projects make sense regarding energy savings.
Any help is appreciated.  Thanks.
 
Here is the building description:
 
The building (29,256 s.f.) was constructed circa 1970-72 and is part of a larger campus.
Heat in the form of steam is produced by the central steam plant and distributed by exchangers
located within the facility. Cool air is produced by either a roof top unit (RTU) located on top,
or by cool water produced in the approximately 30 ton cooling tower located nearby.
The two-story masonry constructed building houses primarily educational facilities. 
 
Thank you,
 

__________ Information from ESET NOD32 Antivirus, version of virus signature database 4966 (20100322) __________

The message was checked by ESET NOD32 Antivirus.

http://www.eset.com



      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100322/9949efa3/attachment.htm>


More information about the Equest-users mailing list