[Equest-users] How to model a bldg with different roof levels?

Alex Krickx akrickx at seriousmaterials.com
Thu Mar 11 14:10:43 PST 2010


It might be easier to make the two shells stacked instead of side-by-side. That way, you can specify that the top shell is open to below and by zoning the bottom shell properly, you can make the part with the high ceiling open to above. Just a thought.

Regards,
Alex Krickx

Alex Krickx
Building Energy Specialist
[cid:image002.jpg at 01CAC124.A37333E0]
1250 Elko Dr, Sunnyvale, CA 94089
(t) 408.541.8124

Warning: The information contained in this e-mail may be privileged attorney-client communications or attorney work product and/or proprietary and confidential.  If the reader of this message is not the intended recipient then you have received it in error and any review, distribution or copying of this message is prohibited and you are to notify us immediately by reply e-mail and delete the original message immediately.



From: equest-users-bounces at lists.onebuilding.org [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Amandeep Singh
Sent: Thursday, March 11, 2010 1:58 PM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] How to model a bldg with different roof levels?

Hello everyone,

I was trying to model a bldg with 50% area at 25 feet high and remaining area at 10 feet. How can I specify different heights in  the footprint of this bldg. in eQUEST?  I tried to draw in DD Wizard. First I drew a footprint with 25-foot height, then I tied to create a new shell with 10-foot height. I wasn't able to put two shells together. Also, I didn't know how to change exterior walls to interior.

Any help would be appreciated .

Regards,
Aman

[cid:image003.jpg at 01CAC124.A37333E0]

Amandeep Singh
Energy Engineer
8690 Balboa Ave, Suite 100
San Diego, CA 92123-1502
858.634.4729 phone
858.244.1178 fax
www.energycenter.org<http://www.energycenter.org/> web



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100311/52115e03/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image002.jpg
Type: image/jpeg
Size: 5602 bytes
Desc: image002.jpg
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100311/52115e03/attachment.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image003.jpg
Type: image/jpeg
Size: 8634 bytes
Desc: image003.jpg
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100311/52115e03/attachment-0001.jpg>


More information about the Equest-users mailing list