[Equest-users] Interior LPD Baseline & Proposed

Nick Caton ncaton at smithboucher.com
Mon Mar 8 17:35:40 PST 2010


Hi Soham,

 

I am no USGBC reviewer, but I have submitted comparative models in the
past using the "actual" design, and working out an equivalent LPD for
the whole building applied uniformly to the spaces.  I do not think
there is anything preventing you from entering the individual space
LPD's in the proposed model, excepting that could take a bit more time.
You may find it pushes your energy savings further however depending on
the rest of your model.

 

 

 

NICK CATON, E.I.T.

PROJECT ENGINEER

25501 west valley parkway

olathe ks 66061

direct 913 344.0036

fax 913 345.0617

Check out our new web-site @ www.smithboucher.com 

 

From: equest-users-bounces at lists.onebuilding.org
[mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Soham
Babu
Sent: Wednesday, March 03, 2010 12:29 AM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] Interior LPD Baseline & Proposed

 

Hi all,

 

In the baseline interior LPD I have gone with  building area method, but
for proposed the electrical floor plans as given space by space LPD ,if
I go with space by method in proposed ASHRAE recommends ? or shall I
have to go with both identical like if I follow building area method in
baseline identical in proposed if yes, than can I take average  LPD of
the all spaces?

 

Any help will be greatly appreciated 

 

Kind Regards

Soham babu

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100308/b1e5a760/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 1459 bytes
Desc: image001.jpg
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100308/b1e5a760/attachment.jpeg>


More information about the Equest-users mailing list