[Equest-users] Understanding Floors
Nick Caton
ncaton at smithboucher.com
Mon Jun 21 09:32:49 PDT 2010
Peter, I think you might be leading yourself into some unnecessary
confusion with your word choices...
eQuest has 3 distinct entities:
- Shells are simply groups of spaces
- Spaces are geometrical volumes, which may or may not have
floors, walls, ceilings, windows, etc. tied to them. Internal loads /
daylighting / occupancies are attributed to spaces.
- Zones are simple entities that include one or more spaces,
with additional HVAC attributes like thermostat and airflow specifics.
You're using "floors" to interchangeable discuss all the above, it
seems. For clarity when discussing eQuest, "floors" are merely the
constructions we walk on, normally one attribute of a "space."
All that said, it's entirely possible to model a "box within a box," as
you're describing. You are limited in the wizards (by their nature)
with regard to defining zones/footprints... the best approach depends on
the nature of the space footprints you want to model. If it's very
simply two stacked cubes enclosed within a larger cube, I'd personally
model one shell, with one space carved out of the middle. Then I'd use
the detailed mode to shrink that space volume and partition/ceiling
dimensions to match the first floor office, then copy the entire space
and its componenents for the second floor. I'd adjust the largest
cube's volume (it's a space property) to correct the conditioned volume,
and be sure all partitions are correctly associating the three spaces
together... With all spaces sorted out, ensure your three spaces are
correctly grouped with regard to "zones," for association with your HVAC
system(s).
Clear as mud =)?
~Nick
NICK CATON, E.I.T.
PROJECT ENGINEER
25501 west valley parkway
olathe ks 66061
direct 913 344.0036
fax 913 345.0617
Check out our new web-site @ www.smithboucher.com
From: equest-users-bounces at lists.onebuilding.org
[mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Peter
Hillermann
Sent: Monday, June 21, 2010 10:56 AM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] Understanding Floors
To All,
I just want to make sure I understand the properties behind floors. If
you have a square building volume with a smaller square inside it that
has 2 levels. EG:- an atrium as main space with 2 levels that are
offices. There will be a total of 3 floors in your model. Atrium floor,
first floor office and second floor office. Each of these will have a
designated floor to floor height. You cannot put one zone inside another
on the same floor.
Is this correct?
Thanks,
PETER HILLERMANN
peterh at westallarchitects.com
westall
architects
3404 pierce drive
chamblee, georgia 30341
o 770.458.4113
f 770.458.5352
c 678.898.2936
westallarchitects.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100621/6dddef44/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 1459 bytes
Desc: image003.jpg
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100621/6dddef44/attachment.jpeg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 3224 bytes
Desc: image004.jpg
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100621/6dddef44/attachment-0001.jpeg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/gif
Size: 2436 bytes
Desc: image005.gif
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100621/6dddef44/attachment.gif>
More information about the Equest-users
mailing list