[Equest-users] U-Values
Peter Hillermann
e190984026 at exchange.1and1.com
Wed Jun 9 08:48:17 PDT 2010
To All,
I seem to be having some issues with my baseline design and my first
parametric run. (I am working in detail mode with INP file) When I make my
baseline wall value R-13 and change it in my run to R-27 my heating (MBTU)
load goes down by 4% however my electric rate (kWh) goes up 1%. I don't
really understand because I thought both would have gone down. Am I doing
something wrong?
Thanks,
PETER HILLERMANN
<mailto:peterh at westallarchitects.com> peterh at westallarchitects.com
westall
architects
3404 pierce drive
chamblee, georgia 30341
o 770.458.4113
f 770.458.5352
c 678.898.2936
westallarchitects.com
e-signatureUSGBC-Logo
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100609/ccda07b7/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/gif
Size: 2436 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100609/ccda07b7/attachment.gif>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 3222 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100609/ccda07b7/attachment.jpeg>
More information about the Equest-users
mailing list