[Equest-users] error trying to create a new window in Dedit mode

Dakota Kelley dakotak at teliospc.com
Fri Jul 23 10:30:14 PDT 2010


SC and U value are glass properties, not window properties.  Make the adjustment to your glass type.  For a 90.1-compliant window, set your frame width to 0 so that the glass properties become the entire assembly properties.  We can’t comment on the other error unless we know what it is…

 

 

  
                                

DAKOTA KELLEY 

Project Designer | Energy Analyst

                          

                              Office: 214.744.6199                 

                              Cell: 214.280.3825

                              Fax: 214.744.0770    

 

http://www.teliospc.com <http://www.teliospc.com/>          3535 Travis St. Suite 115

dakotak at teliospc.com <mailto:dakotak at teliospc.com>             Dallas, TX 75204                                                     

                                

| MEP ENGINEERING · ENERGY MODELING · LEED CONSULTATION · COMMISSIONING |

 

CONFIDENTIALITY NOTICE: This email is intended only for the use of the individual or entity to which it is addressed, 

And may contain information that is privileged, confidential and exempt from disclosure under applicable law. If you

are not the intended recipient, please email the sender immediately, and delete this email from all computers.  Any 

distribution or other use is strictly prohibited.  Copyright © 2009 Telios Corporation.

 

 

 

 

 

 

From: Paul Brooks [mailto:equestpaul at yahoo.com] 
Sent: Friday, July 23, 2010 9:45 AM
To: eQuest user forum
Subject: [Equest-users] error trying to create a new window in Dedit mode

 

I have graduated to the Detailed edit mode for my model.  I am trying to create a new child component (window) for a wall.  I get an error that will not let me continue.  I have been trying to modify an existing window, but cannot get the screen to let me do what I need, which is to input the SC and U value of a window, at this pint I am making a 90.1 complant window.  This should not be this hard.

 

Any suggestions on how to get around this?

 

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100723/ade081e4/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/png
Size: 3170 bytes
Desc: image001.png
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100723/ade081e4/attachment.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 2143 bytes
Desc: image002.jpg
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100723/ade081e4/attachment.jpeg>


More information about the Equest-users mailing list