[Equest-users] Another Steam for DHW question

Paul Brooks equestpaul at yahoo.com
Thu Jul 22 13:07:36 PDT 2010


Are you talking about the Source to Site Efficiency input?  
I thought that would not effect what goes on in the building, but was used for 
some othr calculations?



________________________________
From: "Martz, Amanda" <amartz at klingstubbins.com>
To: Paul Brooks <equestpaul at yahoo.com>; eQuest user forum 
<equest-users at lists.onebuilding.org>
Sent: Thu, July 22, 2010 3:57:18 PM
Subject: RE: [Equest-users] Another Steam for DHW question


You can set the equipment efficiency of the meter. I think what I’m doing 
(because I have the same problem) is setting this efficiency to the efficiency 
of the heat exchanger and any distribution losses. I can’t think of what else to 
do.
 

________________________________

From:equest-users-bounces at lists.onebuilding.org 
[mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Paul Brooks
Sent: Thursday, July 22, 2010 3:53 PM
To: eQuest user forum
Subject: [Equest-users] Another Steam for DHW question
 
I decided to try connecting a steam meter to my DHW loop and delete the water 
heater.  eQuest appears to use the meter to calculate the cst of the steam to 
produce hot water.  Thoughts on how valid this is.
 
Iamstill trying to figure out how to account for lossses through the steam to 
water heat exchanger.  Any ideas would be appreciated!


      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100722/5f40c2eb/attachment.htm>


More information about the Equest-users mailing list