[Equest-users] eQUEST unconditioned spaces

John David Waller jwaller at email.arizona.edu
Fri Jul 16 13:16:03 PDT 2010


Maybe I was too vague in my reply.

I, too, was hoping for some insight into this particular issue.

While I do believe this to be a software (developer) oversight, I also
believe that any offered solution(s) to such a 'problem' could be handled
with slightly more dignity; perhaps even some humility!

It is more likely that 'this' is a software issue more than anything else.
 Hopefully this, and many other issues, will have been addressed in '3.6.4'!

It makes absolutely no sense to me to assign a system to 'unconditioned
space' that is being used to 'condition', condition space. Since every
'space', or zone requires the assignment of a specific mechanical system,
then wouldn't it be likely [as in the 'real world' vs. our 'virtual' one, be
equipped with 'NO" system since it is 'NOT' conditioned, versus an
'operable' system that supplies conditioning to a space that requires such?


While it agreed that all zone 'must belong to a system', I'm not convinced
that your [emphatic] solution employs the ideal method for addressing such
an issue.  It seems to me that you're placing her back to the same point in
which she came to discover such a unique condition.

Looking forward to a legitimate response!

Sincerely--
John


On Fri, Jul 16, 2010 at 7:15 AM, Dakota Kelley <dakotak at teliospc.com> wrote:

>  Amber,
>
>
>
> If I’m following your description, you must be specifying the unconditioned
> zone in Shell Wizard/Screen 2/Zone Characteristics button.  Then you’re
> obviously specifying system-per-floor in the HVAC wizard.  This sounds like
> it should work, but what is happening is Shell Wizard/Screen 14 settings are
> trumping Shell Wizard/Screen 2.  There are two solutions:
>
>
>
> 1)      Simply change the zones to unconditioned in the detailed
> interface.
>
> 2)      Create a new zone group in Shell Wizard/Screen 14.  Assign the
> unconditioned zones to this group, and then make sure the “Conditioned”
> check box is *not* checked.  Assign the group to whatever system makes
> sense and move on (making sure that at least one conditioned zone group is
> also assigned to that system).  All zones have to belong to a system, but if
> they’re unconditioned their parent system is irrelevant.  This method is
> only slightly longer than the one above, but it lets you stay in the wizard.
>
>
>
> If you try to leave an unconditioned “on its own”, which I interpret as
> being assigned to its own single-zone system, you’ll get an error saying
> every system has to have at least one conditioned zone.  Let me know if I
> have misunderstood you.
>
>
>
>
>
> *DAKOTA KELLEY ***
>
> Project Designer | Energy Analyst
>
>
>
>                               Office: 214.744.6199
>
>                               Cell: 214.280.3825
>
>                               Fax: 214.744.0770
>
>
>
> http://www.teliospc.com          3535 Travis St. Suite 115
>
> dakotak at teliospc.com            Dallas, TX 75204
>
>
>
>
> | MEP ENGINEERING · ENERGY MODELING · LEED CONSULTATION · COMMISSIONING |
>
> * *
>
> CONFIDENTIALITY NOTICE: This email is intended only for the use of the
> individual or entity to which it is addressed,
>
> And may contain information that is privileged, confidential and exempt
> from disclosure under applicable law. If you
>
> are not the intended recipient, please email the sender immediately, and
> delete this email from all computers.  Any
>
> distribution or other use is strictly prohibited.  Copyright © 2009 Telios
> Corporation.
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> *From:* Amber Welsh [mailto:amber at timmonsdesigneng.com]
> *Sent:* Thursday, July 15, 2010 9:23 PM
> *To:* equest-users at lists.onebuilding.org
> *Subject:* [Equest-users] eQUEST unconditioned spaces
>
>
>
> What is the best way to handle unconditioned spaces in eQUEST?  Right now,
> I am zoning it separate and calling it unconditioned in the WIZARD.  Then,
> when I assign systems, I am putting the unconditioned zone in a system with
> a conditioned space and saying “ one system per floor”.  Is this the proper
> way to do it?
>
>
>
> I have tried just leaving the zone as unconditioned and on its own, but
> then when I do the “permit submittal” calculation it still asks for the fan
> flow and cooling capacity for that zone.
>
>
>
> *Amber Welsh, P.E. **|** **Associate**
> **LEED® Accredited Professional*
>
>
> 397 5th Street NE,
>
> Atlanta, GA 30308
> (v) 404.810.9020
> (c) 678.488.1967
> timmonsdesigneng.com
>
>
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100716/05872ad4/attachment.htm>


More information about the Equest-users mailing list