[Equest-users] Unmet Hours

[M. Shields]

Maybe I am missing something, but when I click project the Project Totals
table does not show the sum of the hours, just a total percentage outside
throttling range which is the same as the BEPS/BEPU report, and does not
break it out by cooling/heating.  Am I missing something?

 

Michael Shields

 

From: Kelsey VanTassel [mailto:KVanTassel at sustaineng.com] 
Sent: Thursday, July 15, 2010 3:50 PM
To: M. Shields; equest-users at lists.onebuilding.org
Subject: RE: [Equest-users] Unmet Hours

 

I like to look under Airside HVAC. Click on the summary tab, then click on
"project" in the component tree on the left hand side. It will show you the
sum automatically.

 

Kelsey Van Tassel

Mechanical Engineer | kvantassel at sustaineng.com

608.836.4488 ext. 20 | Fax: 608.836.4477

 

Sustainable Engineering Group

901 Deming Way, Suite 201

Madison, WI 53717

www.sustaineng.com <http://www.sustaineng.com/> 

 

 

From: equest-users-bounces at lists.onebuilding.org
[mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of M. Shields
Sent: Thursday, July 15, 2010 2:47 PM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] Unmet Hours

 

Hi All,

 

I am trying to determine the number of unmet cooling and heating hours for
my model.  From what I've read on the BEPU/BEPS reports I can find the % of
the hours that the load is unmet, but is there a way to break this out into
cooling and heating time?  The other alternative I see is to go through
either the SS-F reports, or the Air-Side HVAC section and add up all of the
zones unmet heating and cooling hours.  Does anyone know of a better way to
determine this?

 

Thanks,

Michael Shields

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100715/b6b169d8/attachment.htm>