[Equest-users] How to Change the building orientation in detailed mode

Ming Li mli at cadworks.net
Thu Jul 15 13:45:18 PDT 2010


Thanks a lot! I appreciate it!

From: Nick Caton [mailto:ncaton at smithboucher.com]
Sent: Thursday, July 15, 2010 3:44 PM
To: Jeremy McClanathan; Ming Li; equest-users at lists.onebuilding.org
Subject: RE: [Equest-users] How to Change the building orientation in detailed mode

Jeremy is describing how to simply alter the model's rotation in detailed mode (and he's absolutely right).  There's a better way however when you need to calculate multiple orientations as you're describing.

To save time, click Tools --> Parametric Runs... and create (3) new runs for each rotation (90, 180, 270).  Create a component in each new run that alters the building Azimuth variable.  Reference the screengrab below.

After this, each time you hit calculate, you'll have the option to do all 4 orientations in one go, and you'll have 4 sets of results to peruse in addition.  Major timesaver!

Also, the onebuilding.org mailing list archives are a godsend - check em' out too if you need a fast answer in the future ;).

[cid:image002.png at 01CAD62F.EE40C6B0]


[cid:489575314 at 22072009-0ABB]

NICK CATON, E.I.T.
PROJECT ENGINEER
25501 west valley parkway
olathe ks 66061
direct 913 344.0036
fax 913 345.0617
Check out our new web-site @ www.smithboucher.com

From: equest-users-bounces at lists.onebuilding.org [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Jeremy McClanathan
Sent: Thursday, July 15, 2010 3:36 PM
To: 'Ming Li'; equest-users at lists.onebuilding.org
Subject: Re: [Equest-users] How to Change the building orientation in detailed mode

In the Building Shell module, double click on "Building Data" in the component tree, then change the azimuth.

Jeremy

From: Ming Li [mailto:mli at cadworks.net]
Sent: Thursday, July 15, 2010 1:33 PM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] How to Change the building orientation in detailed mode

Hi All,

I am trying to model a baseline design. I need to simulate the building with its actual orientation and again after rotating the entire building 90, 180, 270 degrees, then averaging the results. I was wondering if I can change the building orientation in detailed mode so that I do not need to go back to Wizard mode. Does anyone know how to do this?

Thanks,

Ming Li, LEED AP


This email message, including any attachments, is for the sole use of the intended recipient and may contain confidential, proprietary, and/or privileged information, as well as content subject to copyright and other intellectual laws.  If you are not the intended recipient, you may not disclose, use, copy, or distribute the email message or its attachments.  If you believe you have received this email message in error, please contact the sender by reply email, immediately delete this email and destroy copies.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100715/7ff52877/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 23044 bytes
Desc: image001.png
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100715/7ff52877/attachment.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image002.jpg
Type: image/jpeg
Size: 1459 bytes
Desc: image002.jpg
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100715/7ff52877/attachment.jpg>


More information about the Equest-users mailing list