[Equest-users] Lighting Control - Occupancy Sensor

Carol Gardner cmg750 at gmail.com
Sun Jul 11 15:26:57 PDT 2010


For the spaces that don't require occupancy sensors you can show savings by
modifying the lighting schedule. I think a 15% reduction is allowed, but
verify that by looking in Appendix G where it tells you what you can do and
when. In fact it would be good for you to make a practice of researching the
answers to these types of questions yourself and save the more complicated
questions for the listserv. It is important to respect everyone's time and
do diligence by trying to find the answers yourself. I know it's a lot to
process at first but you will benefit from the study.

Regards,
Carol

On Sat, Jul 10, 2010 at 6:21 PM, Derek Huang <Derek.Huang at atce.com> wrote:

>  Does anyone know if there is a spot for Occupancy Sensor lighting
> controls ? In both of DD Wizard mode and Detailed Data Edit mode, I didn’t
> see any.
>
>
>
> Thanks,
>
>
>
> *Derek Huang, LEED AP, CPD                                       *
>
> *Mechanical Engineer***
>
>
>
>
>
> 97 E. Brokaw Road, No 300
>
> San Jose, CA 95112
>
> *Direct*: 408 487-1305
>
> *Fax:*      408 436-1511
>
> www.atce.com
>
> derek.huang at atce.com
>
>
>
>
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>


-- 
Carol Gardner PE
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100711/fe1e83bd/attachment.htm>


More information about the Equest-users mailing list