[Equest-users] Follow Up On Previous Post - FCU and AHU

John Aulbach jra_sac at yahoo.com
Mon Jan 18 11:03:06 PST 2010


Omer:

If I understand you correctly, you want a system that heats and cools outside air separately from the roon heaing and cooling.

I used to play this game with hotel guest rooms, with a separate tempering outside unit feeding the guest rooms.

TRY a 4 pipe induction system. If the DOE-2.2 holds to the DOE-2.1E tenets, then there should be two set of coils.

John R. Aulbach, PE, CEM
Senior Energy Engineer

________________________________

PartnerEnergy
1990 E. Grand Avenue, El Segundo, CA 90245
W: 888-826-1216, X254| D: 310-765-7295 | F: 310-817-2745
www.ptrenergy.com| jaulbach at ptrenergy.com
 




________________________________
From: "omoltay at mimtarch.com" <omoltay at mimtarch.com>
To: equest-users at lists.onebuilding.org
Sent: Sat, January 16, 2010 1:21:56 PM
Subject: [Equest-users] Follow Up On Previous Post - FCU and AHU

Hello,

Since my last post I discovered the following in the help:

-------------------------------------

Fan Coil (FC)
Fan Coil Units are either 4-pipe or 2-pipe. The 4-pipe units usually have
two coils (one heating and one cooling), but may have one dual purpose
coil. The units modulate the flow of water to the coil(s); this is a
variable air temperature system. Outside air for fan coil systems is
usually introduced by a separate ventilation system; however, outside air
may be introduced directly into the fan coil unit. Note that the program
does not simulate a separate ventilation system; all outside air is drawn
through the fan coil.

---------------------------------------

So what I am looking for is the separate ventilation system that DOE does
not provide. Since heating and cooling is accomplished in that separate
ventilation system as well, I cannot simply ignore it. Any suggestions on
how to add this?

Thanks,

Omer Moltay, LEED AP
Mimta Ltd.

_______________________________________________
Equest-users mailing list
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send  a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG



      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100118/4d6f98db/attachment.htm>


More information about the Equest-users mailing list