[Equest-users] eQuest not picking Customize U-Value

[John Aulbach]

Don't think you can do this in the Wizard. Try the Detailed Interface.



John R. Aulbach, PE, CEM
Senior Energy Engineer

________________________________

PartnerEnergy
1990 E. Grand Avenue, El Segundo, CA 90245
W: 888-826-1216, X254| D: 310-765-7295 | F: 310-817-2745
www.ptrenergy.com| jaulbach at ptrenergy.com



________________________________
From: Pandora Lei <pandora.lei at p2seng.com>
To: equest-users at lists.onebuilding.org
Sent: Wed, January 13, 2010 2:54:24 PM
Subject: Re: [Equest-users] eQuest not picking Customize U-Value


Hi,
 
I model my window with custom u-value and SHGC in Design Development Wizard. However, when I do a compliance run in DD Wizard the results tells me that eQuest won’t pick up this custom u-value and SHGC. The result shows eQuest pick up the NFRC value which is a default. This happens to my light value that eQuest won’t pick up  the custom W/sf that I input in DD Wizard.
 
 How do I make eQuest pick up the custom u-value and SHGC?
 
Again your input and hep is greatly appreciated. Thanks. 
 
Pandora Lei, EIT
Mechanical Design Engineer
 
P2S Engineering, Inc.
5000 East Spring Street, 8th Floor
Long Beach, CA 90815-5218
T 562.497.2999  F 562.497.2990
www.p2seng.com
 
 
 
 
 
How do I make eQuest pick up the custom u-value and SHGC?
 
Again your input and hep is greatly appreciated. Thanks. 


      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100113/57ac3947/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 71487 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100113/57ac3947/attachment.jpeg>