[Equest-users] Modeling HVAC System

[Vikram Sami]

I normally switch to detailed interface mode. However, you could also
use the zone group definitions in the DD wizard to define zone group.

 

 

Vikram Sami, LEED AP 
Direct Phone 404-253-1466 | Direct Fax 404-253-1366 

LORD, AECK & SARGENT ARCHITECTURE



 

From: equest-users-bounces at lists.onebuilding.org
[mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Pandora
Lei
Sent: Saturday, January 09, 2010 1:36 PM
To: equest-users at lists.onebuilding.org
Subject: Re: [Equest-users] Modeling HVAC System

 

Hi all,

 

First time user on eQuest and I need help on modeling mechanical system.


 

I finished modeled the bldg envelope on Detail Wizard Mode. This is a 3
stories bldg and has two AHUs (AHU-1 and AHU-2) again I modeled it in
the Detail Wizard Mode

 

How do I starts assigning the AHUs to appropriate zone? Does it mean I
need to switch to Detail Interface Mode? 

 

 

 

Again your help is greatly appreciated. Thanks.

 

Pandora Lei, EIT

Mechanical Design Engineer

 

P2S Engineering, Inc.

5000 East Spring Street, 8th Floor

Long Beach, CA 90815-5218

T 562.497.2999  F 562.497.2990

www.p2seng.com

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100111/aa5ff566/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/png
Size: 26277 bytes
Desc: image001.png
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100111/aa5ff566/attachment.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 72952 bytes
Desc: image002.jpg
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100111/aa5ff566/attachment.jpeg>