[Equest-users] IF POLYGON IS INPUT, AREA CANNOT BE USED

Charles Land cland at geo-marine.com
Thu Jan 7 07:55:57 PST 2010


I believe what this is telling you is that if you are using a polygon as your input (which is how the wizard creates your spaces), your area is pretty much set in stone.  The only way I have ever changed the area of a space or zone is to go back into the wizard.  You can try to play with the polygons but It will more than likely be a lot more trouble than redoing your detailed edit work.  Id just suck it up and re-enter the wizard.  If your not trying to change your space area in detail mode and your getting this error, then I don't have a clue.  Maybe try restoring your space areas to default (green) if any of them are red.  Good luck.

From: equest-users-bounces at lists.onebuilding.org [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of shahram at admenergy.com
Sent: Wednesday, January 06, 2010 5:12 PM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] IF POLYGON IS INPUT, AREA CANNOT BE USED

Hello:

Does anyone know how to fix this error "IF POLYGON IS INPUT, AREA CANNOT BE USED"?

Thanks,


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100107/590a890b/attachment.htm>


More information about the Equest-users mailing list