[Equest-users] Question About Good Organization

[Eric Johnson]

If it's a question of data manipulation try ASAP utilities.

Kind Regards, 
___________________________________________
Eric Johnson ¦ LEED Accredited Professional  
Executive Cost Manager
 for  Gardiner & Theobald s.r.o.   
Prague Office: Krakovska 583/9, 110 00 Praha 1
Tel:       +420 224 946 956 
Fax:      +420 224 947 689
Mobile:  +420 724 173 187 
E-mail:   e.johnson at gardiner.cz 
Web:     www.gardiner.com   

PRIVACY AND CONFIDENTIALITY NOTICE
This message, and any files transmitted with it, is intended only for the use of the intended recipient or organisation to whom it is addressed. It may contain information that is privileged and confidential. If you are not the intended recipient, no action may be taken on the information nor should it be copied or shown to a third party. Any views expressed in this communication may not necessarily be the views held by Gardiner & Theobald. 





From: equest-users-bounces at lists.onebuilding.org [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of John Aulbach
Sent: Wednesday, February 24, 2010 9:24 AM
To: omoltay at mimtarch.com;equest-users at lists.onebuilding.org
Subject: Re: [Equest-users] Question About Good Organization


Time to get into your .INP file, my friend and deal with it. Cut from your SPACE to your last window/door/wall to move a SPACE. To perhaps make it easier, put a Number before the SPACE name (i.e., 1-EL1-SW, 2-EL1-SE, etc) in the order you want them. Then just cut and paste by the numbers.

Part of your difficulty lies in TOO MANY SPACES/ZONES. Anything over 100 is, in my opinion, overkill.

I thought this was one of the reasons we are getting away from spreadsheet modelling. Too much comoplexity, and when a probel arises, it becomes a 3 week find.

John Aulbach





From: "omoltay at mimtarch.com" <omoltay at mimtarch.com>
To: equest-users at lists.onebuilding.org
Sent: Tue, February 23, 2010 3:33:36 PM
Subject: [Equest-users] Question About Good Organization

Hello,

Does anybody know how to sort, for example, spaces in eQuest? Since I have
added and modified spaces over the course of modelling, they are in a very
stupid order now and come up in the same order in all the reports. I would
also like to sort my systems and thermal zones, but for me changing their
positions in the INP file is almost impossible with countless child
objects under every space, zone, etc.

Thanks,

Omer Moltay, LEED AP
Mimta Ltd.

_______________________________________________
Equest-users mailing list
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send  a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100224/1cd60820/attachment.htm>