[Equest-users] pan function in eQUEST 3-D view

[Paul Buchheit]

Hello Edward,

Thanks for your response.
I can rotate and zoom using the control key and the left and right mouse
button respectively.
However I do not get the pan function. The camera is always pointed at the
origin.
In pan function the origin should move to the left,right,up, down of the 
screen. However it is always in the center of the screen.
Any ideas?

Thanks,

Paul



Paul Buchheit
Mechanical Engineer
EESI
phone: 541-754-1062
fax: 541-753-3948
paul.buchheit at eesinet.com


----- Original Message ----- 
From: "Edward Allen" <eallen at long.com>
To: "Paul Buchheit" <paul.buchheit at eesinet.com>; 
<equest-users at lists.onebuilding.org>
Sent: Monday, February 22, 2010 5:29 PM
Subject: RE: [Equest-users] pan function in eQUEST 3-D view


Paul,

You hold down CTRL and drag with the left mouse button.

Edward M. Allen
Senior Energy Engineer
LONG Energy Solutions

________________________________________
From: equest-users-bounces at lists.onebuilding.org 
[equest-users-bounces at lists.onebuilding.org] on behalf of Paul Buchheit 
[paul.buchheit at eesinet.com]
Sent: Monday, February 22, 2010 5:49 PM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] pan function in eQUEST 3-D view

Hello All,

Is there a pan function in eQUEST 3-D view?
If so would someone please be so kind as to enlighten me?

Thanks,

Paul


Paul Buchheit
Mechanical Engineer
EESI
phone: 541-754-1062
fax: 541-753-3948
paul.buchheit at eesinet.com




_______________________________________________
Equest-users mailing list
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send  a blank message to 
EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG