[Equest-users] eQuest Activating the Packaged Desiccant Option

[Kathryn Kerns]

I am sorry, I forgot to mention I started in the Design Wizard and then went to Detailed Edit mode, which is where I discovered I couldn't activate the Packaged Desiccant curves.

________________________________

From: John Aulbach [mailto:jra_sac at yahoo.com]
Sent: Tue 8/17/2010 1:46 PM
To: Kathryn Kerns; equest-users at lists.onebuilding.org
Subject: Re: [Equest-users] eQuest Activating the Packaged Desiccant Option


More things unpackage themselves in the Detailed Edit Mode.
 
Go there and see if your wishes come true....so you don't get peeved...
 


John R. Aulbach, PE, CEM

Senior Energy Engineer

________________________________

Partner Energy

1990 E. Grand Avenue, El Segundo, CA 90245
W: 888-826-1216, X254| D: 310-765-7295 | F: 310-817-2745

www.ptrenergy.com <http://www.ptrenergy.com/>  | jaulbach at ptrenergy.com <mailto:%7C%20jaulbach at ptrenergy.com> 

 


________________________________

From: Kathryn Kerns <kathryn.kerns at bceengineers.com>
To: equest-users at lists.onebuilding.org
Sent: Tue, August 17, 2010 1:38:49 PM
Subject: [Equest-users] eQuest Activating the Packaged Desiccant Option


Does anybody know how to activate the Packaged Desiccant option in eQuest? I have created some curves that I think might work and they show up as part of the possible selectable curves when I click on the Packaged Desiccant Tab curves individually, but I can't get the Design Wizard to select this curve or indeed, any curve from the possible list that appears. What am I missing? Some other part of another tab that needs to be activated? If so, where? I just assumed that this option worked and if I could make curves, I could use it. Maybe it doesn't work? If this is true, I am going to be peeved.
 
Thanks for listening.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100817/4a54d909/attachment.htm>