[Equest-users] Modelling Louvers

[Vikram Sami]

Soham,

I'm not sure eQUEST is the appropriate software to model wind towers.
You might want to look into a CFD package. I haven't used Energyplus,
but apparently it has some basic capabilities with the Comis multi-zone
airflow model. 

 

Vikram Sami, LEED AP 
Direct Phone 404-253-1466 | Direct Fax 404-253-1366 

LORD, AECK & SARGENT ARCHITECTURE



 

From: equest-users-bounces at lists.onebuilding.org
[mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Soham
Babu
Sent: Friday, July 17, 2009 3:13 AM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] Modelling Louvers

 

Hi All,

 

We are modeling a factory building. It has got two wind towers of 123 ft
height and 30 ft width. We need to add louver for these wind towers
almost at the top.Could you please tell us the way/procedure to model
louvers.Louver size is around 11 ft  X  8 ft.

 

Your help is greatly valued.

 

Regards,

Soham Babu

Settymech Engineers Pvt Ltd

IC4, SJCE-STEP

SJCE Campus, Manasagongothri

Mysore-570006

INDIA
Tel:  0821-4287492

www.settymech.com <http://www.settymech.com/> 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20090717/0e07fc05/attachment.htm>