[Equest-users] Converting Interior Walls to Exterior Walls

[Kevin Kelly]

Good Afternoon,

 

I have two (2) of the approximately 50 exterior walls that somehow along the
way were modeled as interior walls.  The model is very close to completion
and has a many edits in detailed interface.  Is there any way to convert
these walls into exterior walls? 

 

I have never added any spaces or changed any zone layouts outside of the
wizards.  I am assuming that is what I will end up doing, but I was just
checking to see if there was a quick fix that I couldn't find.

 

Anyone have any clue how this could have happened?

 

I included a screen shot of my 3D model with the specific walls highlighted.

 

Thank you everyone, and have a happy new year!

 

Kevin Kelly. LEED AP

R3 Energy

Energy Systems Analyst

914.909.3940 x115

kkelly at r3energy.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20091229/cec24df7/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: interior walls on the exterior.jpg
Type: image/jpeg
Size: 36535 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20091229/cec24df7/attachment.jpg>