[Equest-users] ES-E report not generated

[Rob Rosen]

That was the problem, there was no utilty rate defined for that meter.

Thanks,
Rob

-----Original Message-----
From: Marlin Addison [mailto:marlin.addison at gmail.com] 
Sent: Tuesday, December 15, 2009 5:21 PM
To: 'Rob Rosen'
Subject: RE: [Equest-users] ES-E report not generated

Rob,
In no utility rates is defined, not ES reports will be generated. Make sure
you have at least one utility rate defined. 
Marlin Addison

-----Original Message-----
From: equest-users-bounces at lists.onebuilding.org
[mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Rob Rosen
Sent: Tuesday, December 15, 2009 1:14 PM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] ES-E report not generated

I have a project where none of the ES sim reports are being generated. The
list of sim reports skips from BEPU to LS-A. The project has no errors or
warnings. Does anyone have any ideas about why this might be happening?

Thanks,

Rob Rosen
Senior Energy Analyst
Taitem Engineering
110 S. Albany St.
Ithaca, NY 14850
Phone: 607-277-1118 ext 110
Fax: 607-277-2119

_______________________________________________
Equest-users mailing list
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send  a blank message to
EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG