[Equest-users] VVT, heating only

Gaurav Mehta gauravm at rushingco.com
Wed Apr 15 13:31:23 PDT 2009


Another method:



Don’t provide any cooling thermostat schedule to the zone  (right click
and select restore default) and set the crankcase heat to 0 kW on unitary
power tab.



Gaurav Mehta, LEED® AP

Senior Project Energy Analyst

direct: 206.462.7658

fax: 206.285.7111

 <http://www.rushingco.com/> www.rushingco.com



From: equest-users-bounces at lists.onebuilding.org
[mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Kalianda,
Angelina
Sent: Wednesday, April 15, 2009 12:37
To: Howe, Timothy; equest-users at lists.onebuilding.org
Subject: Re: [Equest-users] VVT, heating only



Yes, no cooling and it’s HW heating, not furnace.  However it has zone
dampers.



Angelina Kalianda, PE, CEM

AECOM Energy

D 858-947-7193

C 760-585-8624



  _____

From: Howe, Timothy [mailto:Timothy.Howe at stantec.com]
Sent: Wednesday, April 15, 2009 12:24 PM
To: Kalianda, Angelina; equest-users at lists.onebuilding.org
Subject: RE: [Equest-users] VVT, heating only



1.	Put the cooling on a separate electric meter so that it does not
report it, or set the cooling thermostat set point to the maximum
allowable value or a combination of these.
2.	VVT is an available system type.. not sure if you were asking
because of the no cooling.
3.	Utility bill matching is very difficult, you will need to know
more specifics about the schedules of operations, equipment efficiencies,
lighting efficiencies... so on.  If it is close +-10% I would not worry
about it, otherwise you will need to massage the model to fit existing
conditions.



Timothy Howe, MS, LEED® AP
Mechanical Engineer
Stantec
2060 Brighton-Henrietta Town Line Road
Rochester NY 14623-2792
Ph:   (585) 413-5347
Fx:   (585) 272-1814
Cell: (585) 330-8681

 <http://www.stantec.com/> stantec.com



The content of this email is the confidential property of Stantec and
should not be copied, modified, retransmitted, or used for any purpose
except with Stantec's written authorization. If you are not the intended
recipient, please delete all copies and notify us immediately.



ü Please consider the environment before printing this email.





  _____

From: equest-users-bounces at lists.onebuilding.org
[mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Kalianda,
Angelina
Sent: Wednesday, April 15, 2009 3:07 PM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] VVT, heating only

Hi all,



I have a VVT type system but with no cooling, heating only.  What kind of
system type I can model that?  When I chose the HW furnace with zone
ventilation, the heating consumption was smaller than the utility bill.
If I chose other type of system (package VVT, MZ, etc.), it’s assuming it
has some kind of cooling.



Thanks in advance for your help.



Angelina Kalianda, PE, CEM

Development Engineer

D 858-947-7193

C 760-585-8624



AECOM Energy

440 Stevens Avenue

Suite 250

Solana Beach, CA 92075

T 858-947-7144   F 858-947-7145

 <http://www.aecom.com/> www.aecom.com



My e-mail has changed to  <mailto:angelina.kalianda at aecom.com>
angelina.kalianda at aecom.com.  Please update your address books
accordingly.



ü Please consider the environment before printing



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20090415/c955e15f/attachment.htm>


More information about the Equest-users mailing list