[Equest-users] Coincident heating and cooling

John Aulbach jra_sac at yahoo.com
Wed Apr 8 09:30:17 PDT 2009


You must have an HVAC system that CAN perform coincident heating and cooling loads, such as a reheat system. You can minimize it by raisng the cooling set point for that type of system.

--- On Wed, 4/8/09, R Ganesh <rganesh at bluestarindia.com> wrote:


From: R Ganesh <rganesh at bluestarindia.com>
Subject: [Equest-users] Coincident heating and cooling
To: equest-users at lists.onebuilding.org
Date: Wednesday, April 8, 2009, 8:17 AM








Dear All,
 
What are reasons for occurrence of “coincident heating and cooling hours” in the model SS-C and SS-E reports. What should be it’s idle value? What has to be done in order to eliminate it?
 
 
Regards,
Ganesh,
 
-----Inline Attachment Follows-----


_______________________________________________
Equest-users mailing list
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send  a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG



      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20090408/42e678fc/attachment.htm>


More information about the Equest-users mailing list