[Equest-users] CAD File Not Found

Jeremy Poling jpoling at epsteinglobal.com
Wed Apr 1 08:42:36 PDT 2009


Thanks Justin - that looks more like where I went last time I had to do
this.

 

Jeremy R. Poling, LEED AP
Senior Sustainability Analyst
Strategic Services

Site Solutions | Operations | Sustainability

EPSTEIN


________________________________

From: Justin Stenkamp [mailto:justins at pae-engineers.com] 
Sent: Wednesday, April 01, 2009 10:39 AM
To: Jeremy Poling
Subject: RE: [Equest-users] CAD File Not Found

 

The locations of the cad files are located in the pd2 file.  You can
delete them there.

 

From: equest-users-bounces at lists.onebuilding.org
[mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Jeremy
Poling
Sent: Wednesday, April 01, 2009 8:38 AM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] CAD File Not Found

 

I'm running a model in eQuest 3.61 and am receiving a message that a CAD
file cannot be found.  While I know this doesn't affect the output and I
know it is also a valid message, we are going to be doing some extensive
parametric modeling with this model and I'd like to get this message to
disappear so I don't have to watch for it on each parametric run.  Is
there any way to do this without going back into the wizard mode?  I
thought there used to be a line in the BDL file identifying the location
of the CAD file but I have not found one.  Any suggestions are
appreciated - thanks!

 

My e-mail address has changed.
Please update your records using the information provided below.

Jeremy R. Poling, LEED AP
Senior Sustainability Analyst
Strategic Services

Site Solutions | Operations | Sustainability

EPSTEIN

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20090401/01200c7c/attachment.htm>


More information about the Equest-users mailing list