[Equest-users] Incomplete .SIM File

[Scott Criswell]

There are certain versions of DOE-2 that wrote some bogus characters 
into a field of the .SIM file that, in turn, was causing the D2SimViewer 
application to load only a small subset of .SIM reports into the 
drop-down list of results reports.
Can you verify using another editor (WordPad, Word, ...) or even a 
simple file size comparison that the .SIM file is in fact now being 
truncated?

If the file is indeed being truncated, then you should find errors 
listed in the .SIM file that describe the problem that was encountered 
by the simulation which resulted in the truncation.
If the file is not being truncated, but D2SimViewer is simply not able 
to properly index all the reports, then I recommend you simply use 
another editor to view that project's .SIM output.

- Scott


Doebber, Ian wrote:
> For some reason, the .SIM file is not filled out from the model which is
> running smoothly.  At first it was producing a full .SIM file and all of
> a sudden it isn't.  
>
> Can anyone let me know how to fix this issue.
>
> Regards,
> Ian
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>
>
>