[Equest-users] Changing Head Setpoint for Condenser Water Pump Head

[Xavier García Casals]

Did you try the right click/restore to default, or the right click/User 
default options to free this input?

En/na Doebber, Ian ha escrit:
>
> The default Head Setpoint for the Condenser Water Pump on an Open 
> Cooling Tower is 70 feet which is way too high!  I want to set it to 
> 40 feet but EQuest automatically increases it to 70 ft. 
>
>  
>
> How can I reduce the Head to 40 ft without Equest resizing it?
>
>
> Regards
>
> Ian
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>   

-- 

* *

*Xavier García Casals*

 

*Sistemas** Solares, Eficiencia Energética e Ingeniería Bioclimática** *

*AIGUASOL** INGENIERÍA*

* *

Sistemes Avançats d'Energia Solar Tèrmica SCCL

C/ Palermo, 17. Bajos dcha. 28043 Madrid

Tel: (+34) 91 142 27 88

 

C/ Roger de Llúria,  29 3r 2a 08009 Barcelona

Tel: (+34) 93 342 47 55  Fax: (+34) 93 342 47 56

 

Mobil: 660 22 94 45

xavier.garcia at aiguasol.coop <mailto:xavier.garcia at aiguasol.coop>

http://www.aiguasol.coop <http://www.aiguasol.coop/>

* *

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20080916/566dcd52/attachment.htm>