[Equest-users] Blank simulation data

[Daniel Wilkerson]

Hey Steve,

No, the *.sim file is 2440 pages long and contains data, so I'm not sure why the Simulation Results view has all the columns and rows blank...

________________________________
From: Steve Mignogna [mailto:smignogna at gmail.com]
Sent: Tuesday, August 12, 2008 2:35 PM
To: Daniel Wilkerson
Cc: equest-users at lists.onebuilding.org
Subject: Re: [Equest-users] Blank simulation data

Dan-

Is the *.sim file also blank?  Or is this just an issue within equest?  Sometimes equest has issues with long file names and/or non-regular characters such as periods, etc...  I've seen this when I have tried to export hourly reports before but never with the simulation output.

Steve
On Mon, Aug 11, 2008 at 5:17 PM, Daniel Wilkerson <DWilkerson at dwyer.com<mailto:DWilkerson at dwyer.com>> wrote:

Hey all,



For some reason, when I do "Perform Simulation", I get a Simulation Results View screen that has all blank entries.  I don't get any errors when the building is rendered (after I click "Finish" on the DD wizard), so I am wondering what could be causing this problem.  I had to place the floors (shells) on top of each other manually because the higher floors have smaller footprints and the building is at an angle other than North.  Could a tiny discrepancy with the placement of shells on top of one another have caused this error?  Thanks,



     -Dan

_______________________________________________
Equest-users mailing list
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send  a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG<mailto:EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG>



--
Steve Mignogna
Atelier Ten
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20080812/87581f85/attachment.htm>