<div dir="ltr"><div>I am trying to form a rationale for a relatively quick and dirty assessment of some BMS signals and excel appears to be the best tool for this. However, my usage is limited to fairly crude funcitons.</div><p>I have heard that calculations using the form Q = [ΣUA + ΣNV/3].ΔT for correlate closely with more sophisticated simulation methods, when restricted to heat loss. In my mind this makes sense: in heat loss the flow of heat is uni-directional. This is in contrast to cooling where there is usually some form of 'capacitance' necessitating something a bit more 'numerical'. There are other limitations, but these may be expedient. Does anybody have experience of, or is aware of, any of the following:</p><ul><li>Relevant papers or reports</li><li>Usage of such an equation for anything other than a simple heat loss at a fixed design temperature (e.g. binned or time step based calculation)</li></ul><div>Kind regards</div><div><br></div><div>Chris</div></div>