<div dir="ltr"><div><div><div><div><div>Thank you for your replies!<br><br></div>Christoph, <br><br></div>I am more than comfortable with Rhino, sice my background is in architecture, but at the small engineering company where I am working now they do not use this tool. My task was to demonstrate and (maybe) introduce Energy Plus and Radiance to the comapy's routine. As for energy plus, additionally to compare it with the local competitor in Austria from Pokorny tec (<a href="http://www.pokorny-tec.at/">http://www.pokorny-tec.at/</a>). If one can call the commercial software a "competitor" to the non-commercial...<br><br></div>Robert, <br><br></div>following your advice, I installed Energy plus into the default folder and located it again via "scan for tools". This way I only managed to get rid of the minor error (URL Found in IDF: file:files/AUT_Vienna.Schwechat.110360_IWEC.epw but no source could be located.) I call it minor because I saw it appearing in the error list in the tutorial, where the rest of the functions were working. <br><br></div>as for the <br>The job in 'C:/Users/labor/AppData/Local/Temp/OpenStudio.wh4932/resources/run/1-Ruby-0/in/model/radiance/gen_eplus/2-ExpandObjects-0' did not finish successfully.
<p style="margin:0px;text-indent:0px">ERROR: No tool matching: expandobjects 8.2.-.-</p><p style="margin:0px;text-indent:0px"><br></p><p style="margin:0px;text-indent:0px">and</p><p style="margin:0px;text-indent:0px">failed to run ModelToRad<br></p><p style="margin:0px;text-indent:0px"><br></p><p style="margin:0px;text-indent:0px">it is still there. See the report attached.<br></p><p style="margin:0px;text-indent:0px"><br></p><p style="margin:0px;text-indent:0px">I will duplicate my comment to the Unmet hours forum as well. <br></p><br></div><div class="gmail_extra"><br><div class="gmail_quote">On Tue, Jun 9, 2015 at 3:35 PM, Guglielmetti, Robert <span dir="ltr"><<a href="mailto:Robert.Guglielmetti@nrel.gov" target="_blank">Robert.Guglielmetti@nrel.gov</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">Hi Christoph,<br>
<br>
Apologies, when I said "Daysim" in my head of course I was saying "DIVA". We regret the omission.<br>
<br>
OpenStudio does not perform sDA and ASE calculations, however it does do all the other common daylight metrics, _including blinds_, and seamlessly merges the electric lighting results with a whole building energy model. It is this latter point that I hang my hat on. We chose to focus on the whole building integration aspect to the detriment of newer metrics and better interfaces for data visualization. It's a process...<br>
<br>
- Rob<br>
<span class=""><br>
On 6/9/15, 7:25 AM, "Christoph Reinhart" <<a href="mailto:tito_@mit.edu">tito_@mit.edu</a><mailto:<a href="mailto:tito_@mit.edu">tito_@mit.edu</a>>> wrote:<br>
<br>
<br>
Dear Anna,<br>
<br>
<br>
<br>
If you are comfortable using Rhino, check out DIVA (<a href="http://diva4rhino.com" target="_blank">http://diva4rhino.com</a>) as well. We have tutorials and exercises for download here <a href="http://web.mit.edu/sustainabledesignlab/projects/DaylightingHandbook/resources.htm" target="_blank">http://web.mit.edu/sustainabledesignlab/projects/DaylightingHandbook/resources.htm</a>   with more coming within the coming 2 weeks. Our next DIVA training near you will be in London at the Architecture Association on Oct 22-24 before and after DIVA DAY 2015 (<a href="http://diva4rhino.com/diva-day-2015" target="_blank">http://diva4rhino.com/diva-day-2015</a>).<br>
<br>
<br>
<br>
Rob, to my knowledge DIVA was the first and remains the only tool supporting LEED v4 daylighting credit analysis including blinds use at the whole building level. I am of course happy to learn otherwise.<br>
<br>
<br>
<br>
Best,<br>
<br>
Christoph<br>
Christoph Reinhart<br>
Associate Professor<br>
Department of Architecture<br>
Massachusetts Institute of Technology<br>
77 Massachusetts Ave, Rm 5-418, Cambridge, MA 02139, USA<br>
</span>t: <a href="tel:617%20253%207714" value="+16172537714">617 253 7714</a>, f: <a href="tel:617%20253%206152" value="+16172536152">617 253 6152</a>, <a href="mailto:creinhart@mit.edu">creinhart@mit.edu</a><mailto:<a href="mailto:creinhart@mit.edu">creinhart@mit.edu</a>><br>
Sustainable Design Lab<<a href="http://mit.edu/SustainableDesignLab/" target="_blank">http://mit.edu/SustainableDesignLab/</a>>|DIVA<<a href="http://www.diva4rhino.com/" target="_blank">http://www.diva4rhino.com/</a>>| Daysim<<a href="http://daysim.ning.com/" target="_blank">http://daysim.ning.com/</a>>| mapdwell<<a href="http://www.mapdwell.com/" target="_blank">http://www.mapdwell.com/</a>>| umi<<a href="http://www.urbanmodeling.net/" target="_blank">http://www.urbanmodeling.net/</a>><br>
-------------------------------------------------------------------------<br>
Events  Modeling Urban Sustainability<<a href="http://architecture.mit.edu/event/modeling-urban-sustainability-energy-daylight-and-walkability" target="_blank">http://architecture.mit.edu/event/modeling-urban-sustainability-energy-daylight-and-walkability</a>>| DIVA Day 2015 <<a href="http://diva4rhino.com/diva-day-2015" target="_blank">http://diva4rhino.com/diva-day-2015</a>><br>
<span class=""><br>
<br>
<br>
<br>
<br>
<br>
-----Original Message-----<br>
From: Bldg-sim [mailto:<a href="mailto:bldg-sim-bounces@lists.onebuilding.org">bldg-sim-bounces@lists.onebuilding.org</a>] On Behalf Of Guglielmetti, Robert<br>
Sent: Tuesday, June 09, 2015 9:13 AM<br>
</span><span class="">To: Anna Shadrina; <a href="mailto:bldg-sim@lists.onebuilding.org">bldg-sim@lists.onebuilding.org</a><mailto:<a href="mailto:bldg-sim@lists.onebuilding.org">bldg-sim@lists.onebuilding.org</a>><br>
Subject: Re: [Bldg-sim] Radiance and Open studio<br>
<br>
<br>
<br>
Hi Anna,<br>
<br>
<br>
<br>
I have seen people report success when they reinstall EnergyPlus after the OpenStudio installation.<br>
<br>
<br>
<br>
There was a similar comment regarding Radiance alternatives on Unmet Hours recently, and I'll repost my response to that here:<br>
<br>
<br>
<br>
The Radiance functionality in OpenStudio is constantly improving, and indeed we have a lot planned for the fall release. That said, other options for using Radiance to evaluate daylighting abound, with Daysim, Honeybee, SPOT and LightStanza coming to mind. I would selfishly point out that technically all of these options are "limited" in one way or another; OpenStudio focuses on whole building integration of daylighting results, and does that the best of all the options, while being limited in other ways (which we are working on rectifying).<br>
<br>
<br>
<br>
- Rob<br>
<br>
<br>
<br>
</span><span class="">On 6/9/15, 3:06 AM, "Anna Shadrina" <<a href="mailto:neko.enko@gmail.com">neko.enko@gmail.com</a><mailto:<a href="mailto:neko.enko@gmail.com">neko.enko@gmail.com</a><mailto:<a href="mailto:neko.enko@gmail.com">neko.enko@gmail.com</a>%<a href="mailto:3cmailto%3Aneko.enko@gmail.com">3cmailto:neko.enko@gmail.com</a>>>> wrote:<br>
<br>
<br>
<br>
Dear colleagues,<br>
<br>
<br>
<br>
I am just starting to use Radiance on Windows, I did the basic course on Linux before (or on the virtual machine on Windows) and used Open studio plugin for energy plus models.<br>
<br>
<br>
<br>
I am working with Open studio 1.7.0. and have installed Radiance 5.0 on windows. I have created the simple model in Sketchup and inserted the illuminance map, glare sensor and daylighting control in the thermal zone.<br>
<br>
<br>
<br>
Nevertheless, during the daylight simulation Open studio does not seem to detect the certain file "expandobjects 8.2." (the full error list is attached). Even though I performed "Scan for tools" operation.<br>
<br>
<br>
<br>
On the open studio forum "unmet hours" people seem to report similar problems, but it was promised to be solved in 1.7 version... Also it was said that Open studio somehow is only able to locate Energy plus when it is installed in the default folder. But it has nothing to do with Radiance, right?..<br>
<br>
<br>
<br>
Has anyone experienced something similar?<br>
<br>
Is there any better way to use Radiance on Windows apart from Open studio?<br>
<br>
<br>
<br>
My .OSM model is attached.<br>
<br>
<br>
<br>
Thank you in advance!<br>
<br>
<br>
<br>
--<br>
<br>
Anna Shadrina<br>
<br>
<br>
<br>
MSc student Building Science<br>
<br>
Vienna University of Technology<br>
<br>
Vienna, Austria<br>
<br>
_______________________________________________<br>
<br>
Bldg-sim mailing list<br>
<br>
<a href="http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org" target="_blank">http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org</a><br>
<br>
</span>To unsubscribe from this mailing list send  a blank message to <a href="mailto:BLDG-SIM-UNSUBSCRIBE@ONEBUILDING.ORG">BLDG-SIM-UNSUBSCRIBE@ONEBUILDING.ORG</a><mailto:<a href="mailto:BLDG-SIM-UNSUBSCRIBE@ONEBUILDING.ORG">BLDG-SIM-UNSUBSCRIBE@ONEBUILDING.ORG</a>><br>
</blockquote></div><br><br clear="all"><br>-- <br><div class="gmail_signature"><div dir="ltr"><div><div><div>Anna Shadrina<br><br></div>MSc student Building Science<br></div>Vienna University of Technology<br></div>Vienna, Austria<br></div></div>
</div>