<html>
<head>
<style><!--
.hmmessage P
{
margin:0px;
padding:0px
}
body.hmmessage
{
font-size: 12pt;
font-family:Calibri
}
--></style></head>
<body class='hmmessage'><div dir='ltr'>Yi,<br><br>No luck, the same error came up. <br>I'm pretty new at this scripting business but as I understand it, the %1 and %2 are variables that the 'IntegrateDaysim_Master.bat' will substitute- the %1 for the model specified in the .cfg file (ChMod3.idf), and the %2 for the weather file specified in the .cfg. Is this correct?<br><br>Regards,<br>Tavis.<br><br><br><div><hr id="stopSpelling">From: YiZhang@dmu.ac.uk<br>To: rangitokomo@hotmail.com; bldg-sim@lists.onebuilding.org<br>Subject: RE: [Bldg-sim] Coupling GenOpt, Energyplus and Daysim<br>Date: Tue, 18 Mar 2014 11:53:02 +0000<br><br>
<style><!--
.ExternalClass .ecxshape {
}
--></style><style><!--
.ExternalClass p.ecxMsoNormal, .ExternalClass li.ecxMsoNormal, .ExternalClass div.ecxMsoNormal {
font-size:12.0pt;
font-family:"Times New Roman","serif";
}
.ExternalClass a:link, .ExternalClass span.ecxMsoHyperlink {
color:blue;
text-decoration:underline;
}
.ExternalClass span.ecxMsoHyperlinkFollowed {
color:purple;
text-decoration:underline;
}
.ExternalClass p {
font-size:12.0pt;
font-family:"Times New Roman","serif";
}
.ExternalClass p.ecxMsoAcetate, .ExternalClass li.ecxMsoAcetate, .ExternalClass div.ecxMsoAcetate {
font-size:8.0pt;
font-family:"Tahoma","sans-serif";
}
.ExternalClass p.ecxmsonormal, .ExternalClass li.ecxmsonormal, .ExternalClass div.ecxmsonormal {
font-size:12.0pt;
font-family:"Times New Roman","serif";
}
.ExternalClass p.ecxmsoacetate, .ExternalClass li.ecxmsoacetate, .ExternalClass div.ecxmsoacetate {
font-size:12.0pt;
font-family:"Times New Roman","serif";
}
.ExternalClass p.ecxmsochpdefault, .ExternalClass li.ecxmsochpdefault, .ExternalClass div.ecxmsochpdefault {
font-size:12.0pt;
font-family:"Times New Roman","serif";
}
.ExternalClass p.ecxmsonormal1, .ExternalClass li.ecxmsonormal1, .ExternalClass div.ecxmsonormal1 {
font-size:12.0pt;
font-family:"Times New Roman","serif";
}
.ExternalClass p.ecxmsochpdefault1, .ExternalClass li.ecxmsochpdefault1, .ExternalClass div.ecxmsochpdefault1 {
font-size:12.0pt;
font-family:"Times New Roman","serif";
}
.ExternalClass span.ecxmsohyperlink {
}
.ExternalClass span.ecxmsohyperlinkfollowed {
}
.ExternalClass span.ecxmsohyperlink1 {
}
.ExternalClass span.ecxmsohyperlinkfollowed1 {
}
.ExternalClass span.ecxemailstyle181 {
}
.ExternalClass span.ecxemailstyle28 {
}
.ExternalClass span.ecxballoontextchar {
}
.ExternalClass p.ecxmsonormal2, .ExternalClass li.ecxmsonormal2, .ExternalClass div.ecxmsonormal2 {
font-size:12.0pt;
font-family:"Times New Roman","serif";
}
.ExternalClass span.ecxmsohyperlink2 {
color:blue;
text-decoration:underline;
}
.ExternalClass span.ecxmsohyperlinkfollowed2 {
color:purple;
text-decoration:underline;
}
.ExternalClass p.ecxmsoacetate1, .ExternalClass li.ecxmsoacetate1, .ExternalClass div.ecxmsoacetate1 {
font-size:8.0pt;
font-family:"Tahoma","sans-serif";
}
.ExternalClass p.ecxmsochpdefault2, .ExternalClass li.ecxmsochpdefault2, .ExternalClass div.ecxmsochpdefault2 {
font-size:12.0pt;
font-family:"Times New Roman","serif";
}
.ExternalClass p.ecxmsonormal11, .ExternalClass li.ecxmsonormal11, .ExternalClass div.ecxmsonormal11 {
font-size:12.0pt;
font-family:"Times New Roman","serif";
}
.ExternalClass span.ecxmsohyperlink11 {
color:blue;
text-decoration:underline;
}
.ExternalClass span.ecxmsohyperlinkfollowed11 {
color:purple;
text-decoration:underline;
}
.ExternalClass span.ecxemailstyle1811 {
font-family:"Calibri","sans-serif";
color:#1F497D;
}
.ExternalClass p.ecxmsochpdefault11, .ExternalClass li.ecxmsochpdefault11, .ExternalClass div.ecxmsochpdefault11 {
font-size:10.0pt;
font-family:"Times New Roman","serif";
}
.ExternalClass span.ecxemailstyle281 {
font-family:"Calibri","sans-serif";
color:#1F497D;
}
.ExternalClass span.ecxballoontextchar1 {
font-family:"Tahoma","sans-serif";
}
.ExternalClass span.ecxEmailStyle42 {
font-family:"Calibri","sans-serif";
color:#1F497D;
}
.ExternalClass span.ecxBalloonTextChar {
font-family:"Tahoma","sans-serif";
}
.ExternalClass .ecxMsoChpDefault {
font-size:10.0pt;
}
.ExternalClass div.ecxWordSection1 {
}
--></style>
<div class="ecxWordSection1">
<p class="ecxMsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D;">The problem is from wrapping the EPlusRun.bat in another batch file. Try use the third command-line in “IntegrateDaysim_EnergyPlus-7-2-0-Win7.cfg”, i.e.</span></p>
<p class="ecxMsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D;"> </span></p>
<p class="ecxMsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D;">Command = "cmd /C \"\"D:\\MBSc500\\GenOpt\\IntegrateDaysim\\IntegrateDaysim_Master.bat\" \"%Simulation.Files.Input.File1%\" \"%Simulation.CallParameter.Suffix%\"\"";</span></p>
<p class="ecxMsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D;"> </span></p>
<p class="ecxMsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D;">And then change the call line in IntegrateDaysim_Master.bat to:
</span></p>
<p class="ecxMsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D;"> </span></p>
<p class="ecxMsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D;">call "D:\MBSc500\GenOpt\IntegrateDaysim\RunEPlus.bat" %1 %2</span></p>
<p class="ecxMsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D;"> </span></p>
<p class="ecxMsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D;">And see if it works.
</span></p>
<p class="ecxMsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D;"> </span></p>
<p class="ecxMsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D;">Cheers,</span></p>
<p class="ecxMsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D;"> </span></p>
<p class="ecxMsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D;">Yi</span></p>
<p class="ecxMsoNormal"><a name="_MailEndCompose" target="_blank"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D;"> </span></a></p>
<div>
<div style="border:none;border-top:solid #B5C4DF 1.0pt;padding:3.0pt 0cm 0cm 0cm;">
<p class="ecxMsoNormal"><b><span style="font-size:10.0pt;font-family:"Tahoma","sans-serif";" lang="EN-US">From:</span></b><span style="font-size:10.0pt;font-family:"Tahoma","sans-serif";" lang="EN-US"> Tavis Wells [mailto:rangitokomo@hotmail.com]
<br>
<b>Sent:</b> 18 March 2014 02:10<br>
<b>To:</b> Yi Zhang; bldg-sim@lists.onebuilding.org<br>
<b>Subject:</b> RE: [Bldg-sim] Coupling GenOpt, Energyplus and Daysim</span></p>
</div>
</div>
<p class="ecxMsoNormal"> </p>
<div>
<p class="ecxMsoNormal" style=""><span style="font-family:"Calibri","sans-serif";">Hi Yi,<br>
<br>
Very mysterious! Yip I've attached the two .cfg file I've tried (one based on the Eplus.cfg example file; the other based on the batchSimulation.cfg file), and the Master.bat file with the various command lines I've tried (as a word doc- email wouldn't allow
to send .bat).<br>
And the .ini and command.txt if that helps.<br>
<br>
Thank you for your interest and help!<br>
<br>
Best regards,<br>
Tavis.<br>
<br>
</span></p>
<div>
<div class="ecxMsoNormal" style="text-align:center;" align="center"><span style="font-family:"Calibri","sans-serif";">
<hr id="ecxstopSpelling" align="center" size="2" width="100%">
</span></div>
<p class="ecxMsoNormal" style=""><span style="font-family:"Calibri","sans-serif";">From:
<a href="mailto:YiZhang@dmu.ac.uk">YiZhang@dmu.ac.uk</a><br>
To: <a href="mailto:rangitokomo@hotmail.com">rangitokomo@hotmail.com</a>; <a href="mailto:bldg-sim@lists.onebuilding.org">
bldg-sim@lists.onebuilding.org</a><br>
Subject: RE: [Bldg-sim] Coupling GenOpt, Energyplus and Daysim<br>
Date: Mon, 17 Mar 2014 22:30:25 +0000</span></p>
<div>
<p class="ecxMsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D;">Hi Tavis,</span><span style="font-family:"Calibri","sans-serif";"></span></p>
<p class="ecxMsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D;"> </span><span style="font-family:"Calibri","sans-serif";"></span></p>
<p class="ecxMsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D;">Hmm, that’s mysterious. Do you share your batch file(s) with the group? I cannot see any problems from Java’s (GenOpt’s language) point of view…</span><span style="font-family:"Calibri","sans-serif";"></span></p>
<p class="ecxMsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D;"> </span><span style="font-family:"Calibri","sans-serif";"></span></p>
<p class="ecxMsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D;">Cheers,</span><span style="font-family:"Calibri","sans-serif";"></span></p>
<p class="ecxMsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D;"> </span><span style="font-family:"Calibri","sans-serif";"></span></p>
<p class="ecxMsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D;">Yi</span><span style="font-family:"Calibri","sans-serif";"></span></p>
<p class="ecxMsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D;"> </span><span style="font-family:"Calibri","sans-serif";"></span></p>
<div>
<div style="border:none;border-top:solid #B5C4DF 1.0pt;padding:3.0pt 0cm 0cm 0cm;">
<p class="ecxMsoNormal"><b><span style="font-size:10.0pt;font-family:"Tahoma","sans-serif";" lang="EN-US">From:</span></b><span style="font-size:10.0pt;font-family:"Tahoma","sans-serif";" lang="EN-US"> Tavis Wells [<a href="mailto:rangitokomo@hotmail.com">mailto:rangitokomo@hotmail.com</a>]
<br>
<b>Sent:</b> 17 March 2014 11:52<br>
<b>To:</b> Yi Zhang; <a href="mailto:bldg-sim@lists.onebuilding.org">bldg-sim@lists.onebuilding.org</a><br>
<b>Subject:</b> RE: [Bldg-sim] Coupling GenOpt, Energyplus and Daysim</span><span style="font-family:"Calibri","sans-serif";"></span></p>
</div>
</div>
<p class="ecxMsoNormal"><span style="font-family:"Calibri","sans-serif";"> </span></p>
<div>
<div>
<div>
<div>
<p class="ecxMsoNormal"><span style="font-family:"Calibri","sans-serif";">Hi, Thank you for your replies!<br>
<br>
Alstan,<br>
Yes, Khaled's tutorial for GenOpt + Radiance has been very helpful. I think the same input file structure could be used, plus the Daysim Header file.<br>
<br>
Mike, <br>
This RunDirMulti.bat looks like it would be used to simulate a batch of pre-made EnergyPlus models in parallel, is this right? Or does it enable 1 model to run subsequent iterations? I need one iteration to finish before the next starts, so GenOpt can make
its systematic changes to the model.<br>
<br>
Yi,<br>
I've tried copy pasting the Daysim batch file command lines in at the start of the RunEplus.bat so that it runs and completes before the Eplus model. This appears to work when run from the command shell, but, again, not when attempted through GenOpt. I think
it comes back to Eplus and GenOpt- not creating temporary directories properly when called through a batch file (even following the command lines from GenOpts example files)?</span></p>
</div>
<div>
<p class="ecxMsoNormal"><span style="font-family:"Calibri","sans-serif";"><br>
<br>
Best regards,<br>
Tavis.</span></p>
<div>
<div class="ecxMsoNormal" style="text-align:center;" align="center"><span style="font-family:"Calibri","sans-serif";">
<hr align="center" size="2" width="100%">
</span></div>
<p class="ecxMsoNormal"><span style="font-family:"Calibri","sans-serif";">From: <a href="mailto:YiZhang@dmu.ac.uk">
YiZhang@dmu.ac.uk</a><br>
To: <a href="mailto:rangitokomo@hotmail.com">rangitokomo@hotmail.com</a>; <a href="mailto:bldg-sim@lists.onebuilding.org">
bldg-sim@lists.onebuilding.org</a><br>
Subject: RE: [Bldg-sim] Coupling GenOpt, Energyplus and Daysim<br>
Date: Fri, 14 Mar 2014 19:53:27 +0000</span></p>
<div>
<p class="ecxMsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D;">Hi Tavis,</span><span style="font-family:"Calibri","sans-serif";"></span></p>
<p class="ecxMsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D;"> </span><span style="font-family:"Calibri","sans-serif";"></span></p>
<p class="ecxMsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D;">The lines below are from the “EnergyPlusWinXP.cfg” file that comes with GenOpt. Apparently GenOpt does use a batch file (customized RunEPlus.bat) to run E+.
I think your best approach would be to modify the RunEPlus.bat file (or the RunEPlusParallel.bat file in GenOpt), and insert the part that runs DaySim in the same way that the other E+ preparatory steps are done…
</span><span style="font-family:"Calibri","sans-serif";"></span></p>
<p class="ecxMsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D;"> </span><span style="font-family:"Calibri","sans-serif";"></span></p>
<p class="ecxMsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D;">**</span><span style="font-family:"Calibri","sans-serif";"></span></p>
<p class="ecxMsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D;">/* Specifying how to start the simulation program.</span><span style="font-family:"Calibri","sans-serif";"></span></p>
<p class="ecxMsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D;"> In "Command", only those words in %xx% are
</span><span style="font-family:"Calibri","sans-serif";"></span></p>
<p class="ecxMsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D;"> replaced (possibly with empty Strings).</span><span style="font-family:"Calibri","sans-serif";"></span></p>
<p class="ecxMsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D;">*/</span><span style="font-family:"Calibri","sans-serif";"></span></p>
<p class="ecxMsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D;">SimulationStart</span><span style="font-family:"Calibri","sans-serif";"></span></p>
<p class="ecxMsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D;">{</span><span style="font-family:"Calibri","sans-serif";"></span></p>
<p class="ecxMsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D;"> // The command line below calls a custom version of RunEPlus.bat.</span><span style="font-family:"Calibri","sans-serif";"></span></p>
<p class="ecxMsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D;"> // This is needed to run multiple EnergyPlus simulations in parallel,</span><span style="font-family:"Calibri","sans-serif";"></span></p>
<p class="ecxMsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D;"> // because the standard version writes files to the EnergyPlus program</span><span style="font-family:"Calibri","sans-serif";"></span></p>
<p class="ecxMsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D;"> // directory, and hence multiple simulations would access the same files.</span><span style="font-family:"Calibri","sans-serif";"></span></p>
<p class="ecxMsoNormal"><b><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D;"> Command = "cmd /x /c \"start /D\"%Simulation.Files.Input.Path1%\" /WAIT /MIN call \".\\RunEPlusParallel.bat\" %Simulation.Files.Input.File1% %Simulation.CallParameter.Suffix%\"";</span></b><span style="font-family:"Calibri","sans-serif";"></span></p>
<p class="ecxMsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D;"> WriteInputFileExtension = false;</span><span style="font-family:"Calibri","sans-serif";"></span></p>
<p class="ecxMsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D;">}</span><span style="font-family:"Calibri","sans-serif";"></span></p>
<p class="ecxMsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D;">**</span><span style="font-family:"Calibri","sans-serif";"></span></p>
<p class="ecxMsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D;"> </span><span style="font-family:"Calibri","sans-serif";"></span></p>
<p class="ecxMsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D;">Cheers,</span><span style="font-family:"Calibri","sans-serif";"></span></p>
<p class="ecxMsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D;"> </span><span style="font-family:"Calibri","sans-serif";"></span></p>
<p class="ecxMsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D;">Yi</span><span style="font-family:"Calibri","sans-serif";"></span></p>
<p class="ecxMsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D;"> </span><span style="font-family:"Calibri","sans-serif";"></span></p>
<div>
<div style="border:none;border-top:solid #B5C4DF 1.0pt;padding:3.0pt 0cm 0cm 0cm;">
<p class="ecxMsoNormal"><b><span style="font-size:10.0pt;font-family:"Tahoma","sans-serif";" lang="EN-US">From:</span></b><span style="font-size:10.0pt;font-family:"Tahoma","sans-serif";" lang="EN-US">
<a href="mailto:bldg-sim-bounces@lists.onebuilding.org">bldg-sim-bounces@lists.onebuilding.org</a> [<a href="mailto:bldg-sim-bounces@lists.onebuilding.org">mailto:bldg-sim-bounces@lists.onebuilding.org</a>]
<b>On Behalf Of </b>Tavis Wells<br>
<b>Sent:</b> 14 March 2014 10:49<br>
<b>To:</b> <a href="mailto:bldg-sim@lists.onebuilding.org">bldg-sim@lists.onebuilding.org</a><br>
<b>Subject:</b> [Bldg-sim] Coupling GenOpt, Energyplus and Daysim</span><span style="font-family:"Calibri","sans-serif";"></span></p>
</div>
</div>
<p class="ecxMsoNormal"><span style="font-family:"Calibri","sans-serif";"> </span></p>
<div>
<div>
<div>
<p class="ecxMsoNormal"><span style="font-family:"Calibri","sans-serif";">Greetings all!</span></p>
</div>
<div>
<p class="ecxMsoNormal"><span style="font-family:"Calibri","sans-serif";"> </span></p>
</div>
<div>
<p class="ecxMsoNormal"><span style="font-family:"Calibri","sans-serif";">I am attempting to optimize the passive design of a building using GenOpt as the optimizer, EnergyPlus as the primary energy model platform, and daylight reports from Daysim (an identical
model to the Eplus model) which feed into the Eplus model.</span></p>
</div>
<div>
<p class="ecxMsoNormal"><span style="font-family:"Calibri","sans-serif";">Each iteration dictated by GenOpt would need to simulate in Daysim and finish before simulating in Eplus.</span></p>
</div>
<div>
<p class="ecxMsoNormal"><span style="font-family:"Calibri","sans-serif";">I am using a 'Master' batch file, referenced by GenOpt, to call Daysim and then Eplus.</span></p>
</div>
<div>
<p class="ecxMsoNormal"><span style="font-family:"Calibri","sans-serif";">This process works when run straight from the batch file, but when run through GenOpt it does not create the temporary working directory correctly (.expidf and .err files missing), and so
it crashes during the first iteration, saying ".err file does not exist".</span></p>
</div>
<div>
<p class="ecxMsoNormal"><span style="font-family:"Calibri","sans-serif";">Simplifying the task to just optimize Eplus, but through a batch file, has the same result.</span></p>
</div>
<div>
<p class="ecxMsoNormal"><span style="font-family:"Calibri","sans-serif";">The command line I've been working with consists of 3 parts: </span></p>
</div>
<div>
<p class="ecxMsoNormal"><span style="font-family:"Calibri","sans-serif";">Call <RunEplus.bat> <model> <weatherfile></span></p>
</div>
<div>
<p class="ecxMsoNormal"><span style="font-family:"Calibri","sans-serif";">I've tried countless different variations of this command line but cant figure it out!</span></p>
</div>
<div>
<p class="ecxMsoNormal"><span style="font-family:"Calibri","sans-serif";"> </span></p>
</div>
<div>
<p class="ecxMsoNormal"><span style="font-family:"Calibri","sans-serif";">Has anyone optimized an EnergyPlus model through GenOpt using a batch file before? Or know what the command line might look like to do that?</span></p>
</div>
<div>
<p class="ecxMsoNormal"><span style="font-family:"Calibri","sans-serif";"> </span></p>
</div>
<div>
<p class="ecxMsoNormal"><span style="font-family:"Calibri","sans-serif";">Any ideas welcome!</span></p>
</div>
<div>
<p class="ecxMsoNormal"><span style="font-family:"Calibri","sans-serif";"> </span></p>
</div>
<div>
<p class="ecxMsoNormal"><span style="font-family:"Calibri","sans-serif";">Thanks,</span></p>
</div>
<div>
<p class="ecxMsoNormal"><span style="font-family:"Calibri","sans-serif";">Tavis.</span></p>
</div>
<div>
<p class="ecxMsoNormal"><span style="font-family:"Calibri","sans-serif";"> </span></p>
</div>
<div>
<p class="ecxMsoNormal"><span style="font-family:"Calibri","sans-serif";"> </span></p>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
</div></div> </div></body>
</html>