<div dir="ltr">There has been lots of discussion and misinformation about this in the past.  I believe the current take on this from a LEED perspective is that for each space in the proposed design where ventilation is above the required minimum AND there is demand controlled ventilation, the equivalent space in the baseline design shall be modeled with the minimum required ventilation as per ASHRAE 62.1.  For all other cases, baseline ventilation rates should match the proposed ventilation rates, regardless of whether the proposed design uses an increased ventilation rate or not.<div>

<br></div><div>--</div><div>Karen</div></div><div class="gmail_extra"><br><br><div class="gmail_quote">On Thu, Mar 6, 2014 at 3:50 PM, Joe Chappell <span dir="ltr"><<a href="mailto:JoeC@designengineers.com" target="_blank">JoeC@designengineers.com</a>></span> wrote:<br>

<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">





<div lang="EN-US" link="#0563C1" vlink="#954F72">
<div>
<p class="MsoNormal">Good day,<u></u><u></u></p>
<p class="MsoNormal"><u></u> <u></u></p>
<p class="MsoNormal">I have a question regarding the LEED credit for Increased Ventilation (IEQc2).  This is the credit awarded for exceeding ventilation in all spaces by 30% beyond the ASHRAE standard 62.1 requirements.  It seems obvious that the design model
 ventilation rates would be those 30% higher than 62.1 requirements.  What then would the baseline model ventilation rates be? 
<u></u><u></u></p>
<p class="MsoNormal"><u></u> <u></u></p>
<p class="MsoNormal">If you strictly follow 90.1 Appendix G, you should always model baseline and proposed equivalent except for when taking credit for demand controlled ventilation.  However, it seems in this case that it could also be argued (by LEED) that
 you should model the ASHRAE 62.1 required ventilation rates in the baseline model, not those that are 30% higher and therefore pay the energy expense( most climates) for increased outside air.<u></u><u></u></p>
<p class="MsoNormal"><u></u> <u></u></p>
<p class="MsoNormal">Does anyone have any experience with LEED on this issue?  Thanks in advance.<u></u><u></u></p>
<p class="MsoNormal"><u></u> <u></u></p>
<p class="MsoNormal">Kind regards,<u></u><u></u></p>
<p class="MsoNormal"><b><span style="font-size:10.0pt;font-family:"Arial","sans-serif"">Joe Chappell</span></b><span style="font-size:10.0pt;font-family:"Arial","sans-serif""><u></u><u></u></span></p>


<p class="MsoNormal"><span style="font-size:4.0pt;font-family:"Arial","sans-serif""><u></u> <u></u></span></p>
<p class="MsoNormal"><u></u> <u></u></p>
</div>
</div>

<br>_______________________________________________<br>
Bldg-sim mailing list<br>
<a href="http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org" target="_blank">http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org</a><br>
To unsubscribe from this mailing list send  a blank message to <a href="mailto:BLDG-SIM-UNSUBSCRIBE@ONEBUILDING.ORG">BLDG-SIM-UNSUBSCRIBE@ONEBUILDING.ORG</a><br>
<br></blockquote></div><br></div>